You are here: Home > CLI Commands > Just_CLI_Topics > show airmatch debug reporting-radio

show airmatch debug reporting-radio

show airmatch debug reporting-radio

ap-name <name>

mac <mac>

Description

Displays details for an AP radio reporting AirMatch data to a Mobility Master.

Syntax

Parameter

Description

ap-name <name>

Name of an AP for which you want to view AirMatch radio data

mac <mac>

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address an AP for which you want to view AirMatch radio data

Example

(host) [mm] #show airmatch debug reporting-radio ap-name ssa-155

Field Value

----- -----

Band 5GHz

AP Ethernet MAC 9c:1c:12:c0:86:c6

Radio MAC 9c:1c:12:88:6c:70

AP Name ard4

AP Model AP-225

LMS IP 10.3.22.222

Last Update 2016-10-24 17:04:44

Channel 161

Bandwidth 40MHz

Channel Reason AirMatch - Solver

Channel Update Time 2016-10-22 05:04:52

EIRP 12.0 (dBm)

EIRP Reason AirMatch - Init

EIRP Update Time 2016-10-12 13:29:03

Is Active true

Is Static Chan false

Is Static EIRP false

Is Static CSR false

The output of this command includes the following parameters:

Parameter Description
BandBand refers to a specified range of frequencies of electromagnetic radiation.

Radio bandBand refers to a specified range of frequencies of electromagnetic radiation. used by the AP

AP EthernetEthernet is a network protocol for data transmission over LAN. MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network.

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of the EthernetEthernet is a network protocol for data transmission over LAN. interface

Radio MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network.

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of the AP radio

AP Name

Name of the AP

AP Model

AP model type

LMSLocal Management Switch. In multi-controller networks, each controller acts as an LMS and terminates user traffic from the APs, processes, and forwards the traffic to the wired network. IP

IP address of the controller to which the AP is associated

Last Update

Timestamp showing the date and time the AP last sent an update to Mobility Master

Channel

Channel used by the AP radio

Bandwidth

Bandwidth used by the AP radio

Channel Reason

Reason why the channel was modified

Channel Update Time

Timestamp showing the date and time that the channel was updated

EIRPEffective Isotropic Radiated Power or Equivalent Isotropic Radiated Power. EIRP refers to the output power generated when a signal is concentrated into a smaller area by the Antenna.

Radio EIRPEffective Isotropic Radiated Power or Equivalent Isotropic Radiated Power. EIRP refers to the output power generated when a signal is concentrated into a smaller area by the Antenna., in dBmDecibel-Milliwatts. dBm is a logarithmic measurement (integer) that is typically used in place of mW to represent receive-power level. AMP normalizes all signals to dBm, so that it is easy to evaluate performance between various vendors..

EIRPEffective Isotropic Radiated Power or Equivalent Isotropic Radiated Power. EIRP refers to the output power generated when a signal is concentrated into a smaller area by the Antenna. Reason

Reason why the EIRPEffective Isotropic Radiated Power or Equivalent Isotropic Radiated Power. EIRP refers to the output power generated when a signal is concentrated into a smaller area by the Antenna. setting was modified

EIRPEffective Isotropic Radiated Power or Equivalent Isotropic Radiated Power. EIRP refers to the output power generated when a signal is concentrated into a smaller area by the Antenna. Update Time

Timestamp showing the date and time that the EIRPEffective Isotropic Radiated Power or Equivalent Isotropic Radiated Power. EIRP refers to the output power generated when a signal is concentrated into a smaller area by the Antenna. setting was updated

Is Active

Indicates if the AP is active on the network.

Is Static Chan

Indicates if the AP has been assigned to a static channel

Is Static EIRPEffective Isotropic Radiated Power or Equivalent Isotropic Radiated Power. EIRP refers to the output power generated when a signal is concentrated into a smaller area by the Antenna.

Indicates if the AP has been assigned to a static EIRPEffective Isotropic Radiated Power or Equivalent Isotropic Radiated Power. EIRP refers to the output power generated when a signal is concentrated into a smaller area by the Antenna. level

Is Static CSRCertificate Signing Request. In PKI systems, a CSR is a message sent from an applicant to a CA to apply for a digital identity certificate.

Indicates if the AP has been assigned to a static Cell Size Reduction (CSRCertificate Signing Request. In PKI systems, a CSR is a message sent from an applicant to a CA to apply for a digital identity certificate.) value. Cell Size Reduction settings control Rx sensitivity for the AP. When it is set to a specific value, the radio will not receive any frames with SNRSignal-to-Noise Ratio. SNR is used for comparing the level of a desired signal with the level of background noise./RSSIReceived Signal Strength Indicator. RSSI is a mechanism by which RF energy is measured by the circuitry on a wireless NIC (0-255). The RSSI is not standard across vendors. Each vendor determines its own RSSI scale/values. below this configured value.

Related Commands

Command

Description

airmatch profile

This command configures the AirMatch profile.

airmatch ap

A radio set with the airmatch ap freeze command uses a static radio configuration until those settings get explicitly canceled with the airmatch ap unfreeze command.

Command History

Release

Modification

ArubaOS 8.2.0.0

The output in the EIRP field can display EIRPEffective Isotropic Radiated Power or Equivalent Isotropic Radiated Power. EIRP refers to the output power generated when a signal is concentrated into a smaller area by the Antenna. values in .1 dBmDecibel-Milliwatts. dBm is a logarithmic measurement (integer) that is typically used in place of mW to represent receive-power level. AMP normalizes all signals to dBm, so that it is easy to evaluate performance between various vendors. increments.

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/