You are here: Home > CLI Commands > Just_CLI_Topics > show airmatch debug static-radios

show airmatch debug static-radios

show airmatch debug static-radios

band 2ghz|5ghz

Description

Show AirMatch data for AP radios that have been assigned static settings.

Syntax

Parameter

Description

band

Radio bandBand refers to a specified range of frequencies of electromagnetic radiation. for which want to view static radio data.

2 ghz

View data for 2Ghz static radios.

5 ghz

View data for 5Ghz static radios.

Example

(host) *[mynode] (802.11g radio profile "default") #show airmatch debug static-radios

Static Radios for Band 5GHz

Radio Base Mac Chan EIRP Oper /BW /EIRP Static /BW Flag Last Update Time AP Name

Channel Channel

----------------- ---- ---- ------------------ ------------- ---- ------------------- -------

84:d4:7e:d2:10:90 Yes Yes 36/ 160/ 5 36/ 160 2016-10-24 17:06:30 ap315-1

18:64:72:7e:4d:90 Yes Yes 149/ 20/ 5 149/ 20 2016-10-24 17:04:47 x4p3

Flag column indicates '*' if Operating Channel is different from Static Channel configured

Note: Operating Channel can be different from Static Channel during Radar event

Related Commands

Command

Description

airmatch profile

This command configures the AirMatch profile .

airmatch ap

A radio set with the airmatch ap freeze command uses a static radio configuration until those settings get explicitly canceled with the airmatch ap unfreeze command.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/