You are here: Home > CLI Commands > Just_CLI_Topics > show airmatch optimization

show airmatch optimization

show airmatch optimization <seq>

Description

This command displays list of recent RFRadio Frequency. RF refers to the electromagnetic wave frequencies within a range of 3 kHz to 300 GHz, including the frequencies used for communications or Radar signals. optimization jobs performed by AirMatch.

Syntax

Parameter

Description

<seq>

Specify a sequence number to view details for a specific AirMatch solution.

Example

The following example shows the history AirMatch solutions for 5 GHzGigahertz. and 2 Ghz radios.

(host) *[mynode] #show airmatch optimization

Seq Time APs [5GHz] Radios Cost Conflict Deploy [2GHz] Radios Cost Conflict Deploy Type

---- ----------------- --- ------ ----- -------- ------ ------ ----- -------- ------ ---------

#14 20161025_05:04:53 3 3 2.2 0.0 No 0 0.0 0.0 No Scheduled

#13 20161024_05:04:53 3 3 2.2 0.0 No 0 0.0 0.0 No Scheduled

#12 20161023_05:04:50 3 3 2.2 0.0 No 0 0.0 0.0 No Scheduled

#11 20161022_05:04:50 3 3 2.2 0.0 Yes 0 0.0 0.0 No Scheduled

#10 20161020_10:12:59 2 2 2.0 0.0 Yes 0 0.0 0.0 Yes On-demand

#9 20161020_09:20:23 2 2 2.0 0.0 Yes 0 0.0 0.0 Yes Quick

#8 20161020_09:19:27 2 2 2.0 0.0 Yes 0 0.0 0.0 Yes On-demand

 

The output of the show airmatch optimization command includes the following parameters:

Parameter

Description

Seq

Sequence number of the solution. The solution with the highest sequence number is the most recent.

Time

Timestamp showing the date and time AirMatch sent the solution update

APs

Number of APs updated with the new solution

Radios

Number of 5 Ghz or 2 Ghz AP radios updated with the new solution.

Capacity

Capacity is an internal metric to track the quality of a solution. The higher the capacity, the better the solution.

Cost

Cost is an internal metric to track the cost of a solution or a network state. The lower the cost, the better the solution. It is a measure of the overall quality of the solution or the network state.

Conflict

Conflict is an internal metric to track the quality of a solution. The lower the conflict, the better the solution.

Deploy

This column displays a status of Yes if the improvement in the radio bandBand refers to a specified range of frequencies of electromagnetic radiation. met or exceeded the threshold for deployment. If this column displays a status of No, the solution was below the quality threshold and was not deployed.

To see the detail of channel and EIRPEffective Isotropic Radiated Power or Equivalent Isotropic Radiated Power. EIRP refers to the output power generated when a signal is concentrated into a smaller area by the Antenna. plan for all the radios in the network, append the solution sequence number in the same command.

(host) [mm/mynode] #show airmatch optimization 14

# 20161025_05:04:53 Scheduled

# 5GHz capacity/network cost/solution cost/improvement: 11.0/2.2/2.2/0.0%

# 2.4GHz capacity/network cost/solution cost/improvement: 0.0/0.0/0.0/0.0%

# Band Radio Mode Chan CBW EIRP(dBm) APName

---- ----------------- ---- ----- ------ --------- ----------

5GHz 84:d4:7e:d2:10:90 AP 36* 160* 5* ap315-1

5GHz 9c:1c:12:88:6c:70 AP 157i 40i 12. ard4

5GHz 18:64:72:7e:4d:90 AP 149* 20* 5* x4p3

[*] regarded frozen | [.] no change | [i] channel ignored because insufficient quality increase

A radio is regarded frozen if any of the following are true:

The CLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. command "airmatch ap freeze" command has been used to configure and freeze radio settings

The radio's regulatory domain profile leads to a single feasible channel by allowing only single valid channel, channel pair, or channel group.

Neighboring radar and/or channel noise makes only a single channel feasible.

Related Commands

Command

Description

airmatch profile

This command configures the AirMatch profile.

airmatch ap

A radio set with the airmatch ap freeze command uses a static radio configuration until those settings get explicitly canceled with the airmatch ap unfreeze command.

Command History

Release

Modification

ArubaOS 8.1.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/