You are here: Home > CLI Commands > Just_CLI_Topics > show airmatch profile

show airmatch profile

show airmatch profile

Description

This command displays the configuration settings in the AirMatch profile.

Syntax

No parameters

Example

In this example, the output has been divided into multiple sections to better fit on the pages of this document. In the actual CLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions., the output appears in a single, long table.

(host)[mm] #show airmatch profile

AirMatch profile (Predefined (changed))

---------------------------------------

Parameter Value

--------- -----

schedule Enabled

deploy-hour 5 o'clock

quality-threshold 15 percent

The output of this command includes the following parameters:

Parameter

Description

Schedule

Indicates if AirMatch scheduled updates are enabled.

If the AirMatch updates are changed from the default enabled setting to disabled, the Mobility Master continues to receive RFRadio Frequency. RF refers to the electromagnetic wave frequencies within a range of 3 kHz to 300 GHz, including the frequencies used for communications or Radar signals. updates from the APs, but no channel and EIRPEffective Isotropic Radiated Power or Equivalent Isotropic Radiated Power. EIRP refers to the output power generated when a signal is concentrated into a smaller area by the Antenna. changes are executed by the Mobility Master at the scheduled time.

deploy-hour <0-23>

Specify a number from 0-23 to select the hour during which AirMatch updates are sent to the APs (in 24-hour format).

eirp-offset

Manually adjust EIRPEffective Isotropic Radiated Power or Equivalent Isotropic Radiated Power. EIRP refers to the output power generated when a signal is concentrated into a smaller area by the Antenna. levels selected by the AirMatch algorithm by specifying a value from -6 to 6 dBmDecibel-Milliwatts. dBm is a logarithmic measurement (integer) that is typically used in place of mW to represent receive-power level. AMP normalizes all signals to dBm, so that it is easy to evaluate performance between various vendors.

quality-threshold

The quality-threshold parameter represents the percentage of channel quality improvement that will trigger an AirMatch RFRadio Frequency. RF refers to the electromagnetic wave frequencies within a range of 3 kHz to 300 GHz, including the frequencies used for communications or Radar signals. update. If a proposed channel change does not produce an improvement that meets or exceeds this threshold, AirMatch will not trigger a channel change.

Related Commands

Command

Description

airmatch profile

This command configures the AirMatch profile.

airmatch ap

A radio set with the airmatch ap freeze command uses a static radio configuration until those settings get explicitly canceled with the airmatch ap unfreeze command.

Command History:

Release

Modification

ArubaOS 8.1.0.0

The eirp-offset parameter is deprecated. EIRPEffective Isotropic Radiated Power or Equivalent Isotropic Radiated Power. EIRP refers to the output power generated when a signal is concentrated into a smaller area by the Antenna. offset values can now be configured for AP groups via the rf dot11a-radio-profile and rf dot11g-radio-profile commands.

ArubaOS 8.0.1.0

The quality-threshold parameter is introduced.

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/