You are here: Home > CLI Commands > Just_CLI_Topics > show airmatch solution

show airmatch solution

show airmatch solution

ap-name <ap-name>

list-all

lms-ip <lms-ip>

mac <mac-addr>

 

Description

This command displays history of AirMatch solution updates.

Syntax

Parameter

Description

ap-name <ap-name>

Specify the name of an AP with the <ap-name> parameter to view AirMatch solutions for the radios on that AP.

list-all

Show AirMatch solutions for all devices

lms-ip <lms-ip>

Show AirMatch solutions for APs associated to a specific controller by entering the IP address of that controller.

mac <mac-adddr>

Show AirMatch solutions for a specific AP radio by entering the MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of the radio.

Example

The following example shows the history of AirMatch solutions.

(RagSC) ^[mynode] #show airmatch solution list-all

#Band Radio Chan/Opt# CBW EIRP(dBm)/Opt# APName

---- ----------------- --------- -------- -------------- ----------

2GHz 00:24:6c:b1:9a:40 11/NA 20 6/NA RAP_105

5GHz 00:24:6c:b1:9a:48 161/NA 40 12/3 RAP_105

2GHz 6c:f3:7f:a3:9b:80 6/7 20 6/7 RAP135-1

5GHz 6c:f3:7f:a3:9b:90 44/NA 40 12/7 RAP135-1

2GHz 70:3a:0e:8a:8b:c0 6/7 20 6/NA AP315

5GHz 70:3a:0e:8a:8b:d0 40/NA 80 13/7 AP315

2GHz 9c:1c:12:3e:86:00 1/7 20 6/NA RAP3

 

The output of the show airmatch solution command includes the following parameters:

Parameter

Description

BandBand refers to a specified range of frequencies of electromagnetic radiation.

Frequency bandBand refers to a specified range of frequencies of electromagnetic radiation. used by the radio

Radio

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of an AP radio

Chan/Opt#

Channel from optimization Opt #, and the new optimization sequence ID applied by the solution. If no change was made, the Opt# column displays the value "NA".

CBW

Channel bandwidth used by the radio.

EIRPEffective Isotropic Radiated Power or Equivalent Isotropic Radiated Power. EIRP refers to the output power generated when a signal is concentrated into a smaller area by the Antenna./Opt#

EIRPEffective Isotropic Radiated Power or Equivalent Isotropic Radiated Power. EIRP refers to the output power generated when a signal is concentrated into a smaller area by the Antenna. from optimization Opt #, and the optimization sequence ID applied by the solution. If no change was made, the Opt# column displays the value "NA".

AP_name

Name of the AP.

Related Commands

Command

Description

airmatch profile

This command configures the AirMatch profile.

airmatch ap

A radio set with the airmatch ap freeze command uses a static radio configuration until those settings get explicitly canceled with the airmatch ap unfreeze command.

Command History

Release

Modification

ArubaOS 8.1.0.0

The output of this command has been modified to include channel and EIRPEffective Isotropic Radiated Power or Equivalent Isotropic Radiated Power. EIRP refers to the output power generated when a signal is concentrated into a smaller area by the Antenna. information. The information that appeared in the output of this command in previous versions of ArubaOS now appear in the command show airmatch optimization.

ArubaOS 8.0.1.0

The output of this command is updated to include capacity, network cost, solution cost and improvement data for each radio bandBand refers to a specified range of frequencies of electromagnetic radiation..

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/