You are here: Home > CLI Commands > Just_CLI_Topics > show ap allowed-channels

show ap allowed-channels

show ap allowed-channels

ap-name <ap-name>

country-code <country-code> [ap-type <ap-type>]

ip-addr <ip-addr>

Description

This command shows the allowed channels on a specific AP name, country code, or IP address.

Syntax

Parameter

Description

ap-name <ap-name>

Specifies name of an AP.

country-code <country-code> [ap-type <ap-type>]

Specifies country code. If you specify the optional ap-type <ap-type> parameter, the output shows allowed channels for the specified AP type in that country code.

The <ap-type> parameter is the two or three digit model number of the AP, such as 135 for AP-135 or 225 for AP-225. For remote APsRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link., like RAP-3WN, specify the prefix RAP- before the AP model number. If the AP model number includes an alphabetic suffix, such as the AP-175AC, specify the suffix after the model number. Note that the suffix may be case-sensitive.

<ip-addr>

Specifies the IP address of an AP.

Usage Guidelines

Specify the country code for your controller during initial setup. Changing the country code causes the valid channel lists to be reset to the defaults for that country.

Examples

The following command shows all allowed channels for the country code US.

 

(host) [mynode]# show ap allowed-channels US

 

Allowed Channels for Country Code "US" Country "United States"

--------------------------------------------------------------

PHY Type Allowed Channels

-------- ----------------

802.11g (indoor) 1 2 3 4 5 6 7 8 9 10 11

802.11a (indoor) 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 144 149 153 157 161 165

802.11g (outdoor) 1 2 3 4 5 6 7 8 9 10 11

802.11a (outdoor) 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 144 149 153 157 161 165

802.11g 40MHz (indoor) 1-5 2-6 3-7 4-8 5-9 6-10 7-11

802.11a 40MHz (indoor) 36-40 44-48 52-56 60-64 100-104 108-112 116-120 124-128 132-136 140-144 149-153 157-161

802.11g 40MHz (outdoor) 1-5 2-6 3-7 4-8 5-9 6-10 7-11

802.11a 40MHz (outdoor) 36-40 44-48 52-56 60-64 100-104 108-112 116-120 124-128 132-136 140-144 149-153 157-161

802.11a 80MHz (indoor) 36-48 52-64 100-112 116-128 132-144 149-161

802.11a 80MHz (outdoor) 36-48 52-64 100-112 116-128 132-144 149-161

802.11a (DFS) 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 144

Related Commands

Command

Description

ap regulatory activate

This command activates the specified regulatory certificate.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable mode on Mobility Master.

/*]]>*/