You are here: Home > CLI Commands > Just_CLI_Topics > show ap am-filter-profile

show ap am-filter-profile

show ap am-filter-profile

default

<profile-name>

Description

This command shows the AMAir Monitor. AM is a mode of operation supported on wireless APs. When an AP operates in the Air Monitor mode, it enhances the wireless networks by collecting statistics, monitoring traffic, detecting intrusions, enforcing security policies, balancing wireless traffic load, self-healing coverage gaps, and more. However, clients cannot connect to APs operating in the AM mode. filter for an AP.

Syntax

Parameter

Description

Range

Default

<profile-name>

Shows AMAir Monitor. AM is a mode of operation supported on wireless APs. When an AP operates in the Air Monitor mode, it enhances the wireless networks by collecting statistics, monitoring traffic, detecting intrusions, enforcing security policies, balancing wireless traffic load, self-healing coverage gaps, and more. However, clients cannot connect to APs operating in the AM mode. filter for specified profile name.

Usage Guidelines

This command shows the AMAir Monitor. AM is a mode of operation supported on wireless APs. When an AP operates in the Air Monitor mode, it enhances the wireless networks by collecting statistics, monitoring traffic, detecting intrusions, enforcing security policies, balancing wireless traffic load, self-healing coverage gaps, and more. However, clients cannot connect to APs operating in the AM mode. filter for an AP. For the remaining parameters, see the command syntax.

Example

The following example shows the AMAir Monitor. AM is a mode of operation supported on wireless APs. When an AP operates in the Air Monitor mode, it enhances the wireless networks by collecting statistics, monitoring traffic, detecting intrusions, enforcing security policies, balancing wireless traffic load, self-healing coverage gaps, and more. However, clients cannot connect to APs operating in the AM mode. filter for an AP:

(host) [mynode] #show ap am-filter-profile

 

AM Filter List

--------------

Name References Profile Status

---- ---------- --------------

default 2

 

Total:1

The following example shows the AMAir Monitor. AM is a mode of operation supported on wireless APs. When an AP operates in the Air Monitor mode, it enhances the wireless networks by collecting statistics, monitoring traffic, detecting intrusions, enforcing security policies, balancing wireless traffic load, self-healing coverage gaps, and more. However, clients cannot connect to APs operating in the AM mode. filter for a default AP:

(host) [mynode] #show ap am-filter-profile default

 

AM Filter "default"

-------------------

Parameter Value Set

--------- ----- ---

Filtering Disabled

Allow AP's Group Disabled

Allow Frames from Self Disabled

Allowed AP Group N/A

Allowed AP N/A

Related Commands

Command

Description

ap am-filter-profile

This command configures an AMAir Monitor. AM is a mode of operation supported on wireless APs. When an AP operates in the Air Monitor mode, it enhances the wireless networks by collecting statistics, monitoring traffic, detecting intrusions, enforcing security policies, balancing wireless traffic load, self-healing coverage gaps, and more. However, clients cannot connect to APs operating in the AM mode. filter.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable mode on Mobility Master.

/*]]>*/