You are here: Home > CLI Commands > Just_CLI_Topics > show ap ap-group

show ap ap-group

show ap ap-group {ap-name <ap-name>|bssid <bssid>|ip-addr <ip-addr>}

Description

Show the AP group settings for an individual AP.

Syntax

Parameter

Description

ap-name <ap-name>

Show data for an AP with a specific name.

bssid <bssid>

Show data for a specific Basic Service Set Identifier (BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly.). An AP’s BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly. is usually the AP’s MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address.

ip-addr <ip-addr>

Show data for an AP with a specific IP address. Enter the IP address in dotted-decimal format.

Usage Guidelines

Use this command to display the contents of an AP's group profile. If you know the name of the group whose profile settings you want to view, use the command show ap-group <profile-name>. To view a list of all configured AP groups on your Mobility Master, use the command show ap-group.

Examples

In the example below, the output of this command lists the profiles associated with the AP group Corp13.

(host) [mynode] #show ap ap-group AP2

 

AP group "corp13"

-------------------

Parameter Value

--------- -----

Virtual AP N/A

802.11a radio profile default

802.11g radio profile default

Ethernet interface 0 port configuration default

Ethernet interface 1 port configuration default

Ethernet interface 2 port configuration shutdown

Ethernet interface 3 port configuration shutdown

Ethernet interface 4 port configuration shutdown

AP system profile default

AP multizone profile default

802.11a Traffic Management profile N/A

802.11g Traffic Management profile N/A

Regulatory Domain profile default

RF Optimization profile default

RF Event Thresholds profile default

IDS profile default

Mesh Radio profile default

Mesh Cluster profile N/A

AM filter profile default

Provisioning profile N/A

AP authorization profile N/A

Related Commands

Command

Description

ap-group

Configure your AP groups and AP group profiles.

Command History

Command

Description

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/