You are here: Home > CLI Commands > Just_CLI_Topics > show ap arm client-match debug state

show ap arm client-match debug state

show ap arm client-match debug state

{bssid <bssid>|client-mac <client-mac>|radio-bssid <radio-bssid>}

Description

If the Client Match feature is enabled, the output of this command displays the debug information for internal state of objects.

Syntax

Parameter

Description

bssid <bssid>

The BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly. for VAPs.

client-mac <client-mac>

The MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network.  address for stations.

radio-bssid <radio-bssid>

The BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly. for radios.

Usage Guidelines

The optional output modifiers | begin , | exclude, and | include help you display those lines that begin, include, exclude, respectively, the line expression given in the CLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. command. The | redirect-output modifier helps you redirect the command output.

Example

(host)#show ap arm client-match debug state bssid 90:4c:81:73:d8:b0

Mac :90:4c:81:cf:3d:8a

BSSID :90:4c:81:73:d8:b0

Radio BSSID :90:4c:81:73:d8:b0

ESSID :S15_ClientMatch

Eth Mac :90:4c:81:cf:3d:8a

Name :AP515

11k/11r/11h/WMM/UAPSD/HT/VHT/HE:0/0/1/1/1/1/1/1

First Sap/ Dummy :1/0

Radio:0x0x7fce400075e0

VHT Cap Info/ MUMIMO/ CHA:0x38001b1/0/0

Related Commands

Command

Description

rf arm-profile

This command enables ClientMatch.

show ap arm client-match probe-report

This command displays the client probe report for the specified AP.

show ap arm client-match neighbors

This command displays the BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly. of other APs seen by clients in the select AP's RFRadio Frequency. RF refers to the electromagnetic wave frequencies within a range of 3 kHz to 300 GHz, including the frequencies used for communications or Radar signals. neighborhood.

show ap arm virtual-beacon-report

This command displays the virtual beacon report for an AP with a specific IP or MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address.

show ap arm client-match unsupported

This command displays a list of clients that failed to be steered to a more optimal AP, and the reason the initial steering request was triggered.

show ap arm client-match summary

This command shows the history of AP association changes triggered by the client match feature.

show ap arm client-match restriction-table

This command displays the list of clients that ClientMatch has restricted from the specified AP.

show ap arm client-match history

This command shows the history of AP association changes triggered by the client match feature.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/