You are here: Home > CLI Commands > Just_CLI_Topics > show ap association remote

show ap association remote

show ap association remote [ap-name <ap-name>|ap-group <ap-group>|bssid <bssid>|channel <channel>|essid <essid>

Description

Display the association table for an individual AP or group of APs in bridge mode.

Syntax

Parameter

Description

ap-name <ap-name>

Show AP associations for a specific remote APRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link..

ap-group <ap-group>

Show AP associations for a specific group of remote APsRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link..

bssid <bssid>

Show the AP associations for an specific AP Basic Service Set Identifier (BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly.). The Basic Service Set Identifier (BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly.) is usually the AP’s MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address.

channel <channel>

Show remote APRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link. associations for a specific channel.

essid <essid>

Show remote APRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link. associations for an Extended Service Set Identifier (ESSIDExtended Service Set Identifier. ESSID refers to the ID used for identifying an extended service set.). An Extended Service Set Identifier (ESSIDExtended Service Set Identifier. ESSID refers to the ID used for identifying an extended service set.) is a alphanumeric name that uniquely identifies a wireless network. If the name includes spaces, you must enclose the ESSIDExtended Service Set Identifier. ESSID refers to the ID used for identifying an extended service set. in quotation marks.

Examples

The output of the command below shows the association table for clients in the AP group group1.

show ap association remote ap-group group1

 

Flags: W: WMM client, A: Active, R: RRM client

PHY Details: HT: High throughput; 20: 20MHz; 40: 40MHz ss: spatial streams

 

Association Table

-----------------

Name bssid mac auth assoc aid l-int essid vlan-id tunnel-id phy assoc.time num assoc Flags

---- ----- --- ---- ----- --- ----- ----- ------- --------- --- ---------- --------- -----

AP71 00:0b:23:c1:d6:11 00:12:6d:03:1c:f1 y y 1 10 t-lab 111 0x108e a 23s 1 A

Num Clients:1

 

The output of this command includes the following information:

Column

Description

Name

Name of an AP

bssid

The AP Basic Service Set Identifier (BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly.)

mac

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of the AP

auth

This column displays a y if the AP has been configured for 802.11802.11 is an evolving family of specifications for wireless LANs developed by a working group of the Institute of Electrical and Electronics Engineers (IEEE). 802.11 standards use the Ethernet protocol and Carrier Sense Multiple Access with collision avoidance (CSMA/CA) for path sharing. authorization frame types. Otherwise, it displays an n.

assoc

This column displays a y if the AP has been configured for 802.11802.11 is an evolving family of specifications for wireless LANs developed by a working group of the Institute of Electrical and Electronics Engineers (IEEE). 802.11 standards use the Ethernet protocol and Carrier Sense Multiple Access with collision avoidance (CSMA/CA) for path sharing. association frame types. Otherwise, it displays an n.

aid

802.11802.11 is an evolving family of specifications for wireless LANs developed by a working group of the Institute of Electrical and Electronics Engineers (IEEE). 802.11 standards use the Ethernet protocol and Carrier Sense Multiple Access with collision avoidance (CSMA/CA) for path sharing. association ID. A client receives a unique 802.11802.11 is an evolving family of specifications for wireless LANs developed by a working group of the Institute of Electrical and Electronics Engineers (IEEE). 802.11 standards use the Ethernet protocol and Carrier Sense Multiple Access with collision avoidance (CSMA/CA) for path sharing. association ID when it associates to an AP.

1-int

Number of beacons in the 802.11802.11 is an evolving family of specifications for wireless LANs developed by a working group of the Institute of Electrical and Electronics Engineers (IEEE). 802.11 standards use the Ethernet protocol and Carrier Sense Multiple Access with collision avoidance (CSMA/CA) for path sharing. listen interval. There are ten beacons sent per second, so a ten-beacon listen interval indicates a listen interval time of 1 second.

essid

Name that uniquely identifies the AP’s Extended Service Set Identifier (ESSIDExtended Service Set Identifier. ESSID refers to the ID used for identifying an extended service set.).

vlan-id

Identification number of the AP’s VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN..

tunnel-id

Identification number of the AP’s tunnel.

phy

The RFRadio Frequency. RF refers to the electromagnetic wave frequencies within a range of 3 kHz to 300 GHz, including the frequencies used for communications or Radar signals. bandBand refers to a specified range of frequencies of electromagnetic radiation. in which the AP should operate:

g = 2.4 GHzGigahertz.

a = 5 GHzGigahertz.

assoc. time

Amount of time the client has associated with the AP, in the format hours:minutes:seconds.

num assoc

Number of clients associated with the AP.

flags

This column displays any flags for this AP. The list of flag abbreviations is included in the output of the show ap association remote command.

Related Commands

Command

Description

ap system-profile

This command configures an AP system profile.

show ap arm client-match history

This command shows the history of AP association changes triggered by the client match feature.

show ap arm client-match summary

This command shows the history of AP association changes triggered by the client match feature.

Command History

Command

Description

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/