You are here: Home > CLI Commands > Just_CLI_Topics > show ap authorization-profile

show ap authorization-profile

show ap authorization-profile [<profile-name>]

Description

This command shows information for AP authorization profiles.

Syntax

Parameter

Description

<profile-name>

The name of an an existing AP authorization profile.

Usage Guidelines

The AP authorization profile specifies which configuration should be assigned to a remote APRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link. that has been provisioned but not yet authenticated at the remote site. By default, these yet-unauthorized APs are put into the temporary AP group authorization-group and assigned the predefined profile NoAuthApGroup. This configuration allows the user to connect to an unauthorized remote APRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link. via a wired port then enter a corporate username and password. Once a valid user has authorized the AP and the remote APRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link. will be marked as authorized on the network. The remote APRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link. will then download the configuration assigned to that AP by it's permanent AP group.

Issue this command without the <profile-name> option to display the entire AP authorization profile list, including profile status and the number of references to each profile. Include a profile name to display the authorization group defined for that profile.

Examples

The following example lists all AP authorization profiles. The References column lists the number of other profiles with references to that authorization profile, and the Profile Status column indicates whether the profile is predefined. User-defined AP authorization profiles will not have an entry in the Profile Status column.

(host) #show ap authorization-profile

 

AP Authorization profile List

-----------------------------

Name References Profile Status

---- ---------- --------------

Noauthprofile  1

default 2           Predefined (editable)

Total:2

To display the authentication group for an individual profile, include the <profile> parameter. The example below shows the profile details for the AP authorization profile Default.

(host) #show ap authorization-profile default

 

AP Authorization profile "default" (Predefined (editable))

----------------------------------------------------------

Parameter Value

--------- -----

AP authorization group NoAuthApGroup

The output of the show ap authorization command includes the following parameters:

Parameter

Value

AP authorization group

Name of a configuration profile to be assigned to the group unauthorized remote APsRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link..

Related Commands

Command

Description

ap authorization-profile

This command defines a temporary configuration profile for remote APsRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link. that are not yet authorized on the network.

Command History

Command

Description

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/