You are here: Home > CLI Commands > Just_CLI_Topics > show ap bw-report

show ap bw-report

show ap bw-report {ap-name <ap-name>|bssid <bssid>|ip-addr <ip-addr>}

Description

Show the bandwidth reporting table for a specific AP.

Syntax

Parameter

Description

ap-name <ap-name>

Show bandwidth data for an AP with a specific name.

bssid <bssid>

Show bandwidth data for a specific Basic Service Set Identifier (BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly.) on an AP. The Basic Service Set Identifier (BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly.) is usually the AP’s MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address.

ip-addr <ip-addr>

Show bandwidth data for an AP with a specific IP address by entering an IP address in dotted-decimal format.

Examples

The output of the following command shows the Aruba AP bandwidth table for an AP with the IP address 192.0.2.170.

show ap bw-report ip-addr 192.0.2.170

 

Bandwidth report for AP "AL16" radio 0

--------------------------------------

Virtual AP Allocated Share Actual Share Offered Load Delivered Load

---------- --------------- ------------ ------------ --------------

corp1344-guest 0% 0% 0 kbps 0 kbps

corp1344-ethersphere-wpa2 0% 0% 0 kbps 0 kbps

Average Throughput:0 kbps

 

Bandwidth report for AP "AL16" radio 1

--------------------------------------

Virtual AP Allocated Share Actual Share Offered Load Delivered Load

---------- --------------- ------------ ------------ --------------

corp1344-guest 0% 0% 0 kbps 0 kbps

corp1344-ethersphere-voip 0% 0% 0 kbps 0 kbps

corp1344-ethersphere-vocera 0% 0% 0 kbps 0 kbps

Average Throughput:0 kbps

 

The output of this command includes the following information for all radios on the AP:

Column

Description

Virtual AP

Name of a Virtual AP

Allocated Share

Maximum percentage of total bandwidth available to that Virtual AP.

Actual Share

Actual percentage of total bandwidth used by a Virtual AP.

Offered Load

Attempted throughput for the Virtual AP, in kbps.

Delivered Load

Actual throughput for the Virtual AP, in kbps. This value may be less than the offered load if the Virtual AP has used all its allocated bandwidth.

Average Throughput

Average throughput for the virtual AP, in kbps.

Command History

Command

Description

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/