You are here: Home > CLI Commands > Just_CLI_Topics > show ap database

show ap database

show ap database

flags <flags>

group {default|noauthapgroup|<group>}

inactive {flags|group|indoor|local|long|outdoor|page|sort-by|sort-direction|start|status|switch|type|unprovisioned|usb}

indoor {flags|group|inactive|local|long|outdoor|page|sort-by|sort-direction|start|status|switch|type|unprovisioned|usb}

local {flags|group|inactive|indoor|long|outdoor|page|sort-by|sort-direction|start|status|switch|type|unprovisioned|usb}

long {flags|group|inactive|indoor|local|outdoor|page|sort-by|sort-direction|start|status|switch|type|unprovisioned|usb}

outdoor {flags|group|inactive|indoor|local|long|page|sort-by|sort-direction|start|status|switch|type|unprovisioned|usb}

page <page> {flags|group|inactive|indoor|local|long|outdoor|sort-by|sort-direction|start|status|switch|type|unprovisioned|usb}

sort-by {ap-flags|ap-group|ap-ip|ap-mac|ap-name|ap-serial|ap-type|fqln|provisioned|status|switch-ip|uptime}

sort-direction {ascending|descending}

start <start>

status {up|down}

switch <switch-ip-addr>

type {cap|mesh|rap}

unprovisioned {flags|group|inactive|indoor|local|long|outdoor|page|sort-by|sort-direction|start|status|switch|type|usb}

usb {flags|group|inactive|indoor|local|long|outdoor|page|sort-by|sort-direction|start|status|switch|type|unprovisioned}

Description

This commands shows the list of access points in the database.

Syntax

Parameter

Description

flags

Shows only access points with specified flags [LUDINRCc12ME].

group <group>

Shows only access points in specified AP group.

inactive

Shows only local access points with no active BSSIDsBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly. or wired AP interfaces.

indoor

Shows only indoor access points.

local

Shows only access points connected to this managed device.

long

Shows following additional columns for access points:

Wired MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. Address,

Serial #

Port

FQLNFully Qualified Location Name. FQLN is a device location identifier in the format: APname.Floor.Building.Campus.

outdoor

Shows only outdoor access points.

page <page>

Shows only specified number of access points.

sort-by

Shows access points filtered by following columns:

ap-flags

ap-group

ap-ip

ap-mac

ap-name

ap-serial

ap-type

fqln

provisioned

status

switch-ip

uptime

sort-direction

Shows access points in sorted in following sequence:

ascending

descending

start <start>

Shows access points from the specified AP index number.

status

Shows access points sorted by following status:

down

up

switch <switch-ip-addr>

Shows access points registered with a specified managed device.

unprovisioned

Shows only unprovisioned access points.

usb

Shows USBUniversal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. related parameters.

Usage Guidelines

Many of the parameters in this command can be used together to filter a large database of information down to just the AP data you want to see. For example, you can issue the command show ap database group <group> local status up to view a list of local APs within a specific AP group that are reporting an up status. Include the sort-by and sort-direction keywords to specify how the data is sorted in the output of this command.

Examples

The following example shows shows the information of the access points in the group default. The output also includes a description of the flag types that may appear in the Flags column.

(host) [mynode] #show ap database group default

 

AP Database

-----------

Name Group AP Type IP Address Status Flags Switch IP Standby IP

---- ----- ------- ---------- ------ ----- --------- ----------

ap-205 default 205 191.191.191.252 Up 10d:8h:8m:6s 2p 192.192.189.1 0.0.0.0

ap-215 default 215 191.191.191.253 Up 33d:14h:1m:37s 192.192.189.1 0.0.0.0

 

Flags: U = Unprovisioned; N = Duplicate name; G = No such group; L = Unlicensed

I = Inactive; D = Dirty or no config; E = Regulatory Domain Mismatch

X = Maintenance Mode; P = PPPoE AP; B = Built-in AP; s = LACP striping

R = Remote AP; R- = Remote AP requires Auth; C = Cellular RAP;

c = CERT-based RAP; 1 = 802.1X authenticated AP; 2 = Using IKE version 2

u = Custom-Cert RAP; S = Standby-mode AP; J = USB cert at AP

i = Indoor; o = Outdoor

M = Mesh node; Y = Mesh Recovery

z = Datazone AP

p = In deep-sleep status

4 = WiFi Uplink

 

Total APs:2

Related Commands

Command

Description

database synchronize

This command configures the Mobility Master to synchronize the database with a standby or backup Mobility Master.

Command History

Release

Modification

ArubaOS 8.5.0.0

A new flag, 4 was introduced to indicate Wi-FiWi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. uplink.

ArubaOS 8.4.0.0

A new flag, p was introduced to show that the AP is in deep-sleep mode.

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable mode on Mobility Master.

/*]]>*/