You are here: Home > CLI Commands > Just_CLI_Topics > show ap database-summary

show ap database-summary

show ap database-summary

Description

Show a general summary of access point information for this controller.

Usage Guidelines

Use this command to show the current number of active APs and Air Monitors. This command is also useful for determining how many unprovisioned APs or duplicate APs are on the network. For full details on each AP registered to a controller, use the command show ap database.

Examples

The output of this command shows that this controller can detect a total of five APs, four up, and one down.

AP Database Summary

-------------------

AP Mode Total Up Total Down Total Upgrading* Total Rebooting* RAP Up RAP Down RAP Upgrading* RAP Rebooting*

------- -------- ---------- ---------------- ---------------- ------ -------- -------------- --------------

Access Points 4 1 0 0 0 0 0 0

Air Monitors 0 0 0 0 0 0 0 0

Wired Access Points 0 0 0 0 0 0 0 0

Mesh Portals 0 0 0 0 0 0 0 0

Mesh Points 0 0 0 0 0 0 0 0

Spectrum Monitors 1 1 0 0 0 0 0 0

 

*Upgrading and Rebooting counts only reflect APs registered on this controller.

The output of this command includes the following information:

Column

Description

Total Up

Total number of APs with an up status.

Total Down

Total number of APs with a down status.

IPSEC Up

Total number of APs with an active (up) IPsecInternet Protocol security. IPsec is a protocol suite for secure IP communications that authenticates and encrypts each IP packet in a communication session. tunnel.

IPSEC Down

Total number of APs with an inactive (down) IPsecInternet Protocol security. IPsec is a protocol suite for secure IP communications that authenticates and encrypts each IP packet in a communication session. tunnel.

Related Commands

Command

Description

database-synchronize

This command synchronizes the Mobility Master database with a standby or backup Mobility Master.

Command History

Command

Description

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/