You are here: Home > CLI Commands > Just_CLI_Topics > show ap debug dot11r

show ap debug dot11r

show ap debug dot11r

efficiency <client-mac>

state [ap-name <ap-name> | ip-addr <ip-addr>] ip6-addr <ip6-addr>

Description

This command displays all the r1 keys that are stored in an AP and the hit/miss rate of r1 keys cached on an AP before a Fast BSSBasic Service Set. A BSS is a set of interconnected stations that can communicate with each other. BSS can be an independent BSS or infrastructure BSS. An independent BSS is an ad hoc network that does not include APs, whereas the infrastructure BSS consists of an AP and all its associated clients. Transition roaming.

Syntax

Parameter

Description

efficiency <client-mac>

Show the hit/miss rate of r1 keys cached on an AP before a Fast BSSBasic Service Set. A BSS is a set of interconnected stations that can communicate with each other. BSS can be an independent BSS or infrastructure BSS. An independent BSS is an ad hoc network that does not include APs, whereas the infrastructure BSS consists of an AP and all its associated clients. Transition roaming for the specified client MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address.

state

Show all the r1 keys that are stored in an AP based on the filter specified.

ap-name <ap-name>

Show debugging information for a specific AP.

ip-addr <ip-addr>

Show debugging information for an AP with a specific IP address by entering its IP address in dotted-decimal format.

ip6-addr <ip6-addr>

Show debugging information for an AP with a specific IPv6 address by entering its IPv6 address in dotted-decimal format.

Examples

Use this command to view all the r1 keys that are stored in an AP. You can filter the output based on the AP name or IP address.

(host) #show ap debug dot11r state ap-name MAcage-105-GL

 

Stored R1 Keys

--------------

Station MAC Mobility Domain ID Validity Duration R1 Key

----------- ------------------ ----------------- ------

00:50:43:21:01:b8 1 3568 (32): 94 ff 18 0a 5f 47 8b 3e 95 2b 93 31 bd 44 58 fe fe 6a ad aa 1d d7 29 94 fb 5b 7c 15 76 66 d2 1f

 

Use this command to view the hit/miss rate of r1 keys cached on an AP before a Fast BSSBasic Service Set. A BSS is a set of interconnected stations that can communicate with each other. BSS can be an independent BSS or infrastructure BSS. An independent BSS is an ad hoc network that does not include APs, whereas the infrastructure BSS consists of an AP and all its associated clients. Transition roaming. This counter helps to verify if enough r1 keys are pushed to the neighboring APs.

 

(host) #show ap debug dot11r efficiency

Fast Roaming R1 Key Efficiency

------------------------------

Client MAC Hit (%) Miss (%)

---------- ------- --------

00:50:43:21:01:b8 0 (0%) 0 (0%)

Related Commands

Command

Description

ap debug dot 11r remove-key

This command removes the r1 key from an AP.

Command History

Command

Description

ArubaOS 8.2.0.0

The ip6-addr parameter was introduced.

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/