You are here: Home > CLI Commands > Just_CLI_Topics > show ap debug anyspot-stats

show ap debug anyspot-stats

show ap debug anyspot-stats {[ap-name <ap-name>]|[ip-addr <ip-addr>]|[ip6-addr <ip6-addr>]} {radio <radio>}

Description

This command shows anyspot statistics of a radio on an AP.

Syntax

Parameter

Description

ap-name <ap-name>

Shows anyspot statistics of a radio on an AP specified by AP name.

ip-addr <ip-addr>

Shows anyspot statistics of a radio on an AP specified by IP address.

ip6-addr <ip6-addr>

Shows anyspot statistics of a radio on an AP specified by IPv6 address.

radio <radio>

Shows ACLAccess Control List. ACL is a common way of restricting certain types of traffic on a physical port. table in AP datapath of AP specified by radio ID (either 0 or 1).

Usage Guidelines

This command shows anyspot statistics of a radio on an AP. For the remaining parameters, see the command syntax.

Example

The following example shows anyspot is disabled on radio 0 of an AP named ap-205:

(host) [mynode] #show ap debug anyspot-stats ap-name ap-205 radio 0

 

Anyspot is disabled on the specified radio!

Related Commands

Command

Description

wlan anyspot-profile

The anyspot client probe suppression feature decreases network traffic by suppressing probe requests from clients attempting to locate and connect to other known networks.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable mode on Mobility Master.

/*]]>*/