You are here: Home > CLI Commands > Just_CLI_Topics > show ap debug ble-config

show ap debug ble-config

show ap debug ble-config {ap-name <ap-name>|ip-addr <ip-addr>|ip6-addr <ip6-addr>}

Description

This command displays the Bluetooth Low Energy (BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption.) configuration of the AP. In addition, the command displays the update interval to the Beacon Management Console (BMCBeacon Management Console. BMC manages and monitors beacons from the BLE devices. The BLE devices are used for location tracking and proximity detection.), BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. token, AP Beacon (APB) status, the last update time to BMCBeacon Management Console. BMC manages and monitors beacons from the BLE devices. The BLE devices are used for location tracking and proximity detection., and the beacon MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. for which the last update was sent.

 

This command is supported in 210 Series, 220 Series (with external BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. USBUniversal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. ), and 320 Series.

Syntax

Parameter

Description

ap-name

Displays the BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. configuration of an AP for a specific AP based on the AP name.

ip-addr

Displays the BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. configuration of an AP for a specific AP based on the IPv4 address.

ip6-addr

Displays the BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. configuration of an AP for a specific AP based on the IPv6 address.

Example

The output of this command displays the update interval to the Beacon Management Console (BMCBeacon Management Console. BMC manages and monitors beacons from the BLE devices. The BLE devices are used for location tracking and proximity detection.), BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. token, AP Beacon (APB) status, the last update time to BMCBeacon Management Console. BMC manages and monitors beacons from the BLE devices. The BLE devices are used for location tracking and proximity detection., and the beacon MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. for which the last update was sent.

(host) #show ap debug ble-config ap-name ap325

BLE Configuration

-----------------

Item Value

---- -----

LMS IP 192.0.2.1

Authorization Token YzJlNmEzOTMtYjE4MC00ZTc4LWJmNDEtMzMzNGEyY2NjY2RmOj Y4YzBhOWI2LWYxMGQtNGZlMi05YmVkLTI5ZTY5MDNkYjhmYQ==

Endpoint URL https://edit.meridianapps.com/api/beacons/manage

BLE Ready Yes

Update Intvl (in sec) 300

BLE debug log Enabled

Operational Mode Beaconing (APB: Beaconing)

Uplink Status Up (APB: -NA-)

APB Connection Status 0

Last BLE Device Update Attempt c4:be:84:19:ef:99

Last Update Sent Time 2015-09-27 11:45:50

-----------------

Note: Uplink status is applicable only for Dynamic Console operational mode.

For APBs of type LS-BT1USB, applied operational mode is Beaconing if ap system profile setting is either Persistent or Dynamic.

 

Related Commands

Command

Description

ble_relay

This command configures the Bluetooth Low Energy (BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption.) relay on devices.

Command History

Command

Description

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/