You are here: Home > CLI Commands > Just_CLI_Topics > show ap debug ble-counters

show ap debug ble-counters

show ap debug ble-counters {ap-name <ap-name>|ip-addr <ip-addr>|ip6-addr <ip6-addr>}

Description

This command displays the packet counters for BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. devices seen by the AP. In addition, the command displays if any high power beacons are seen, the time at which configuration update was received for the beacons from the BMCBeacon Management Console. BMC manages and monitors beacons from the BLE devices. The BLE devices are used for location tracking and proximity detection. and the updated response sent back.

 

This command is supported in 210 Series, 220 Series (with external BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. USBUniversal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. ), and 320 Series.

Syntax

Parameter

Description

ap-name

Displays the packet counters for BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. devices seen by the AP for a specific AP based on the AP name.

ip-addr

Displays the packet counters for BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. devices seen by the AP for a specific AP based on the IPv4 address.

ip6-addr

Displays the packet counters for BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. devices seen by the AP for a specific AP based on the IPv6 address.

Example

The output of this command displays the packet counters for BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. devices seen by the AP. In addition, it displays if any high power beacons are seen, the time at which configuration update was received for the beacons from the BMCBeacon Management Console. BMC manages and monitors beacons from the BLE devices. The BLE devices are used for location tracking and proximity detection. and the updated response sent back.

(host) #show ap debug ble-counters ap-name ap325

 

BLE Device Table

----------------

MAC Major# Minor# iBeacon ScanRspV0 ScanRspV1 HiPwr RSSI

--- ------ ------ ------- --------- --------- ----- ----

d0:39:72:d5:43:75 1000 1215 453 0 62 4 -71

c4:be:84:19:8b:a3 0 0 617 0 6 4 -81

c4:be:84:19:ec:67 0 0 604 0 1 4 -83

d0:39:72:d4:fa:9c 6 1 1 0 0 0 -89

c4:be:84:19:ef:99 1000 1374 126 0 0 0 --

78:a5:04:15:23:35 1000 1222 445 0 47 1 -70

c4:be:84:19:ec:2f 0 0 575 0 1 5 -84

 

LastUpdate CfgRx CfgTx

---------- ----- -----

4s NoUpdate NoUpdate

4s NoUpdate NoUpdate

4s NoUpdate NoUpdate

1292s NoUpdate NoUpdate

4s NoUpdate NoUpdate

4s NoUpdate NoUpdate

4s NoUpdate NoUpdate

 

Total beacons:7

Total serial bytes read from APB:138761

Total msg bytes processed:138761

Total serial bytes dropped:0

Related Commands

Command

Description

ble_relay

This command configures the Bluetooth Low Energy (BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption.) relay on devices.

Command History

Command

Description

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/