You are here: Home > CLI Commands > Just_CLI_Topics > show ap debug ble-update-status

show ap debug ble-update-status

show ap debug ble-update-status {ap-name <ap-name>|ip-addr <ip-addr>|ip6-addr <ip6-addr>}

Description

This command displays the configuration update status for BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. devices seen by the AP. In addition, the command displays the active versus desired configuration based on the configuration received from the BMCBeacon Management Console. BMC manages and monitors beacons from the BLE devices. The BLE devices are used for location tracking and proximity detection. (if any).

 

This command is supported in 210 Series, 220 Series (with external BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. USBUniversal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. ), and 320 Series.

Syntax

Parameter

Description

ap-name

Displays the configuration update status for BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. devices seen by the AP based on the AP name.

ip-addr

Displays the configuration update status for BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. devices seen by the AP based on the IPv4 address.

ip6-addr

Displays the configuration update status for BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. devices seen by the AP based on the IPv6 address.

Example

The output of this command displays the configuration update status for BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. devices seen by the AP. In addition, the command displays the active versus desired configuration based on the configuration received from the BMCBeacon Management Console. BMC manages and monitors beacons from the BLE devices. The BLE devices are used for location tracking and proximity detection. (if any).

(host) #show ap debug ble-update-status ap-name ap325

 

BLE Device Table

----------------

BLE Device MAC Attribute Actual/Observed Desired/Pending

-------------- --------- --------------- ---------------

d0:39:72:d5:43:75 Tx Power 13 13

d0:39:72:d5:43:75 Major 1000 1000

d0:39:72:d5:43:75 Minor 1215 1215

d0:39:72:d5:43:75 UUID 5D3BCC63-BD6B-4FAF-906F-91C91519A69B 5D3BCC63-BD6B-4FAF-906F-91C91519A69B

d0:39:72:d5:43:75 DWAS 0 0

c4:be:84:19:8b:a3 Tx Power 14 14

c4:be:84:19:8b:a3 Major 0 0

c4:be:84:19:8b:a3 Minor 0 0

c4:be:84:19:8b:a3 UUID 4152554E-F99B-4A3B-86D0-947070693A78 4152554E-F99B-4A3B-86D0-947070693A78

c4:be:84:19:8b:a3 DWAS 0 0

c4:be:84:19:ec:67 Tx Power 14 14

c4:be:84:19:ec:67 Major 0 0

c4:be:84:19:ec:67 Minor 0 0

c4:be:84:19:ec:67 UUID 4152554E-F99B-4A3B-86D0-947070693A78 4152554E-F99B-4A3B-86D0-947070693A78

c4:be:84:19:ec:67 DWAS 0 0

d0:39:72:d4:fa:9c --- Ineligible Reason:Missing data

c4:be:84:19:ef:99 Tx Power 2 2

c4:be:84:19:ef:99 Major 1000 1000

c4:be:84:19:ef:99 Minor 1374 1374

c4:be:84:19:ef:99 UUID 09458C20-4586-4ED3-8D2F-A0842ACBD6E6 09458C20-4586-4ED3-8D2F-A0842ACBD6E6

c4:be:84:19:ef:99 Firmware 1.1-38 1.1-38 (Status:65535/0 - NotRequired)

c4:be:84:19:ef:99 DWAS 0 0

78:a5:04:15:23:35 Tx Power 13 13

78:a5:04:15:23:35 Major 1000 1000

78:a5:04:15:23:35 Minor 1222 1222

78:a5:04:15:23:35 UUID 09458C20-4586-4ED3-8D2F-A0842ACBD6E6 09458C20-4586-4ED3-8D2F-A0842ACBD6E6

78:a5:04:15:23:35 DWAS 0 0

c4:be:84:19:ec:2f Tx Power 14 14

c4:be:84:19:ec:2f Major 0 0

c4:be:84:19:ec:2f Minor 0 0

c4:be:84:19:ec:2f UUID 4152554E-F99B-4A3B-86D0-947070693A78 4152554E-F99B-4A3B-86D0-947070693A78

c4:be:84:19:ec:2f DWAS 0 0

 

Total beacons:7

Devices marked "Ineligible" are currently not capable of being upgraded.

Related Commands

Command

Description

ble_relay

This command configures the Bluetooth Low Energy (BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption.) relay on devices.

Command History

Command

Description

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/