You are here: Home > CLI Commands > Just_CLI_Topics > show ap debug ble-action-status

show ap debug ble-action-status

show ap debug ble-action-status {ap-name <ap-name>|ip-addr <ip-addr>|ip6-addr <ip6-addr>}

Description

This command displays the action status for BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. devices seen by the AP.

Syntax

Parameter

Description

ap-name

Displays the action status for BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. devices seen by the AP based on the AP name.

ip-addr

Displays the action status for BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. devices seen by the AP based on the IPv4 address.

ip6-addr

Displays the action status for BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. devices seen by the AP based on the IPv6 address.

Example

The output of this command displays the action status for BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption. devices seen by the AP.

(host) #show ap debug ble-action-status ap-name ap325

 

BLE Device Action Table

-----------------------

 

Pending Actions

---------------

BLE Device MAC ActionId Operation Characteristic Value Status

-------------- -------- --------- -------------- ----- ------

 

 

 

Completed Actions

-----------------

BLE Device MAC ActionId Operation Characteristic Value Status

-------------- -------- --------- -------------- ----- ------

 

Related Commands

Command

Description

ble_relay

This command configures the Bluetooth Low Energy (BLEBluetooth Low Energy. The BLE functionality is offered by Bluetooth® to enable devices to run for long durations with low power consumption.) relay on devices.

Command History

Command

Description

ArubaOS 8.5.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/