You are here: Home > CLI Commands > Just_CLI_Topics > show ap remote debug bucketmap datapath

show ap remote debug bucketmap datapath

show ap remote debug bucketmap datapath {ap-name <ap-name> | ip-addr <ip-addr> | ip6-addr <ip6-addr>} essid <essid>

Description

This command shows bucket maps in AP datapath.

Syntax

Parameter

Description

ap-name <ap-name> essid <essid>

Shows bucket maps filtered by specified AP name and ESSIDExtended Service Set Identifier. ESSID refers to the ID used for identifying an extended service set..

ip-addr <ip-addr> essid <essid>

Shows bucket maps filtered by specified IP address of an AP and ESSIDExtended Service Set Identifier. ESSID refers to the ID used for identifying an extended service set..

ip6-addr <ip6-addr> essid <essid>

Shows bucket maps filtered by specified IPv6 address of an AP and ESSIDExtended Service Set Identifier. ESSID refers to the ID used for identifying an extended service set..

Usage Guidelines

This command shows bucket maps in AP datapath. For the remaining parameters, see the command syntax.

Example

Access the CLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. and use the following command to show bucket maps in AP datapath filtered by the AP test and ESSIDExtended Service Set Identifier. ESSID refers to the ID used for identifying an extended service set. default:

(host) [mynode] #show ap remote debug bucketmap datapath ap-name test essid default

 

Essid default radio=0 zone=1 - Num UACs 4

-----------------------------------------------------

Index ArrayIdx UAC IP Active AAC Standby AAC Num STAs

----- -------- ------ ---------- ----------- --------

0 0 10.15.146.3 Yes No 0

1 1 10.15.146.4 No No 1

2 2 10.15.146.5 No No 0

3 3 10.15.146.6 No No 0

Station List

------------

UAC Index Station Mac BSSID

--------- ----------- -----

1 80:86:F2:40:14:8D 9C:1C:12:89:5C:9C

Bucket Map

----------

Bucket Idx Range Bucket Map

---------------- ----------

[0-31] 0 1 2 3 0 1 2 3 0 1 2 3 0 1 2 3 0 1 2 3 0 1 2 3 0 1 2 3 0 1 2 3

[32-63] 0 1 2 3 0 1 2 3 0 1 2 3 0 1 2 3 0 1 2 3 0 1 2 3 0 1 2 3 0 1 2 3

[64-95] 0 1 2 3 0 1 2 3 0 1 2 3 0 1 2 3 0 1 2 3 0 1 2 3 0 1 2 3 0 1 2 3

[96-127] 0 1 2 3 0 1 2 3 0 1 2 3 0 1 2 3 0 1 2 3 0 1 2 3 0 1 2 3 0 1 2 3

[128-159] 0 1 2 3 0 1 2 3 0 1 2 3 0 1 2 3 0 1 2 3 0 1 2 3 0 1 2 3 0 1 3 0

[160-191] 1 3 0 1 3 0 1 3 0 1 3 0 1 3 0 1 3 0 1 3 0 1 3 0 1 3 0 1 3 0 1 3

[192-223] 0 1 3 0 1 3 0 1 3 0 1 3 0 1 3 0 1 3 0 1 3 0 1 3 0 1 3 0 1 3 0 1

[224-255] 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1

- Standby Map

[0-31] 1 0 1 1 1 0 1 1 1 0 1 1 1 0 1 1 1 0 1 1 1 0 1 1 1 0 1 1 1 0 1 1

[32-63] 1 0 1 1 1 0 1 1 1 0 1 1 1 0 1 1 1 0 1 1 1 0 1 1 1 0 1 1 1 0 1 1

[64-95] 1 0 1 1 1 0 1 1 1 0 1 1 1 0 1 1 1 0 1 1 1 0 1 1 1 0 1 1 1 0 1 1

[96-127] 1 0 1 1 1 0 1 1 3 0 0 0 3 0 0 0 3 0 0 0 3 0 0 0 3 0 0 0 3 0 0 0

[128-159] 3 0 0 0 3 0 0 0 3 0 0 0 3 0 0 0 3 0 0 0 3 0 0 0 3 0 0 0 3 0 0 3

[160-191] 0 0 3 0 0 3 0 0 3 0 0 3 0 0 3 0 2 3 3 2 3 3 2 3 3 2 3 3 2 3 3 2

[192-223] 3 3 2 3 3 2 3 3 2 3 3 2 3 3 2 3 3 2 3 3 2 3 3 2 3 3 2 3 3 2 3 3

[224-255] 3 3 3 3 3 3 3 3 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

Statistics:Bmap Updates=0; UAC:Adds=4 Deletes=0; STA:Adds=0 Deletes=494 moves=0 errs=0 copies=0

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable mode on managed devices.

/*]]>*/