You are here: Home > CLI Commands > Just_CLI_Topics > show ap debug bss-stats

show ap debug bss-stats

show ap debug bss-stats [bssid <bssid>]

Description

Show debug and troubleshooting statistics from a specific BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly. of an AP.

Syntax

Parameter

Description

bssid <bssid>

Show data for a specific Basic Service Set Identifier (BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly.) on an AP. An AP’s BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly. is usually the AP’s MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address.

Examples

The example below shows part of the output of the command show ap debug bss-stats bssid <bssid>.

(host) #show ap debug bss-stats bssid 00:1a:1e:11:5f:11

BSSID Stats

-----------

BSSID Stats

-----------

Parameter Value

--------- -----

------------------- General

------------------- Transmit

Tx Frames Rcvd 972118

Tx Bcast Frames Rcvd 4139

Tx Frames Dropped 375241

Tx Bcast Frames Dropped 0

Tx Frames Transmitted 596088

Tx Bytes Rcvd 633849487

Tx Bytes Transmitted 593931482

Tx Time Frames Rcvd 705492586

Tx Time Frames Dropped 397125178

Tx Time Frames Transmitted 308367408

Tx Success With Retry 91875

Tx Multiple Retries 467116

Tx Mgmt Frames 502661

Tx Beacons Transmitted 3528036

Tx Probe Responses 502612

Tx Data Transmitted Retried 91867

Tx Data Transmitted 467744

Tx Data Frames 469457

Tx Broadcast Data Frames In 4139

Tx Data Bytes Transmitted 580843154

Tx Data Bytes 582581297

Tx Time Data Transmitted 173621140

Tx Time BC/MC Data 0

Tx Time Data dropped 4070686

Tx Time Data 177691826

Tx Time Data (Ideal) 0

Tx Broadcast Data Frames Sent 4136

Tx Multicast Data Frames 4011

Tx DMO Multicast 0

Tx DMO Invalid 0

Tx Data Frames 12 Mbps (Mon) 0

Tx Data Frames 24 Mbps (Mon) 0

Tx Data Frames 36 Mbps (Mon) 0

Tx Data Frames 54 Mbps (Mon) 0

Tx Data Frames 72 Mbps (Mon) 0

Tx Data Frames 108 Mbps (Mon) 0

Tx Data Frames 300 Mbps (Mon) 22651

Tx Data Frames 450 Mbps (Mon) 0

Tx Data Frames 1300 Mbps (Mon) 0

Tx Data Frames 1300 Mbps+ (Mon) 0

Tx Data Bytes 12 Mbps (Mon) 0

Tx Data Bytes 24 Mbps (Mon) 0

Tx Data Bytes 36 Mbps (Mon) 0

Tx Data Bytes 54 Mbps (Mon) 0

Tx Data Bytes 72 Mbps (Mon) 0

Tx Data Bytes 108 Mbps (Mon) 0

Tx Data Bytes 300 Mbps (Mon) 34300555

Tx Data Bytes 450 Mbps (Mon) 0

Tx Data Bytes 1300 Mbps (Mon) 0

Tx Data Bytes 1300 Mbps+ (Mon) 0

Tx 6 Mbps 11

Tx HT 130 Mbps 22651

Tx WMM [BE] 22651

Tx UAPSD OverflowDrop 0

Tx Mgmt Bytes 547

...

The output of this command includes the following information:

Parameter

Description

Tx Frames Rcvd

Number of transmitted frames that were received.

Tx Bcast Frames Rcvd

Number of transmitted broadcast frames that were received.

Tx Frames Dropped

Number of transmitted frames that were dropped.

Tx Bcast Frames Dropped

Number of transmitted broadcast frames that were dropped.

Tx Frames Transmitted

Number of frames successfully transmitted.

Tx Bytes Rcvd

Number of transmitted bytes received.

Tx Bytes Transmitted

Number of transmitted bytes.

Tx Time Frames Rcvd

Number of times transmitted frames were received.

Tx Time Frames Dropped

Number of times transmitted frames were dropped.

Tx Time Frames Transmitted

Number of times frames were transmitted.

Tx Success With Retry

Number of frames that were successfully transmitted after being retried.

Tx Multiple retries

Number of frames that were successfully transmitted after being retried multiple times.

Tx Mgmt Frames

Number of management frames transmitted.

Tx Beacons Transmitted

Number of beacons transmitted.

Tx Probe Responses

Number of transmitted probe responses.

Tx Data Transmitted Retried

Number of retried data frames.

Tx Data Transmitted

Number of transmitted data frames.

Tx Data Frames

Number of transmitted data frames.

Tx Broadcast Data Frames In

Number of broadcast data frames received by the AP from wired interface to be transmitted in the air.

Tx Data Bytes Transmitted

Total data bytes received by an AP from its wired interface to be transmitted over the air.

Tx Data Bytes

Total data bytes transmitted by the AP over the air.

Tx Time BC/MC Data

Total time spent transmitting broadcast/multicast frames.

Tx Time Data dropped

Total time spent transmitting dropped frames.

Tx Time Data

Total time spent sending frames received for transmission, including the frames that were dropped after retrying.

Tx Broadcast Data Frames Sent

Broadcast data frames transmitted by the AP.

Tx Multicast Data Frames

Multicast data frames transmitted by the AP.

Tx DMO Multicast

NOTE: This counter applies to APs in decrypt-tunnel or split forwarding modes only. They may also increment for Instant APs in bridge forwarding mode if the Instant AP performs bridge-mode multicast conversion.

Tx DMO Invalid

NOTE: This counter applies to APs in decrypt-tunnel or split forwarding modes only. They may also increment for Instant APs in bridge forwarding mode if the Instant AP performs bridge-mode multicast conversion.

Tx DMO Converted

NOTE: This counter applies to APs in decrypt-tunnel or split forwarding modes only. They may also increment for Instant APsin bridge forwarding mode if the Instant AP performs bridge-mode multicast conversion.

Tx DMO Replicated

NOTE: This counter applies to APs in decrypt-tunnel or split forwarding modes only. They may also increment for Instant APsin bridge forwarding mode if the Instant AP performs bridge-mode multicast conversion.

Tx DMO Dropped

NOTE: This counter applies to APs in decrypt-tunnel or split forwarding modes only. They may also increment for Instant APsin bridge forwarding mode if the Instant AP performs bridge-mode multicast conversion.

Tx DMO No Client

Number of times no client was found for an association-ID indicated by the frame. (This value is typically normally 0.)

NOTE: This counter applies to APs in decrypt-tunnel or split forwarding modes only. They may also increment for Instant APs in bridge forwarding mode if the Instant AP performs bridge-mode multicast conversion.

Tx DMO No BSSID

Number of times the BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly. indicated by the frame was not found. (This value is typically normally 0.)

NOTE: This counter applies to APs in decrypt-tunnel or split forwarding modes only. They may also increment for Instant APsin bridge forwarding mode if the Instant AP performs bridge-mode multicast conversion.

Tx Unicast Data Frames

Number of transmitted unicast data frames.

Tx RTS Success

Number of Ready To Send (RTSRequest to Send. RTS refers to the data transmission and protection mechanism used by the 802.11 wireless networking protocol to prevent frame collision occurrences. See CTS.) frames successfully transmitted.

Tx RTS Failed

Number of Ready To Send (RTSRequest to Send. RTS refers to the data transmission and protection mechanism used by the 802.11 wireless networking protocol to prevent frame collision occurrences. See CTS.) frames that were not successfully transmitted

Tx CTS Frames

Number of Clear-to-Send (CTSClear to Send. The CTS refers to the data transmission and protection mechanism used by the 802.11 wireless networking protocol to prevent frame collision occurrences. See RTS. ) frames transmitted.

Tx Dropped After Retry

Number of frames dropped after an attempted retry.

Tx Dropped No Buffer

Number of frames dropped because the AP’s buffer was full.

Tx Missed ACKs

Number of retries triggered because an acknowledgement was not received.

Tx EAPOL Frames

Number of EAPOL frames transmitted

TX STBC Frames

Number of transmitted frames with Space-time block coding (STBCSpace-Time Block Coding. STBC is a technique used in wireless communications to transmit multiple copies of a data stream across a number of antennas and to exploit the various received versions of the data to improve the reliability of data transfer.) enabled.

TX LDPC Frames

Number of transmitted frames with Low Density Parity Check (LDPCLow-Density Parity-Check. LDPC is a method of transmitting a message over a noisy transmission channel using a linear error correcting code. An LDPC is constructed using a sparse bipartite graph.) enabled.

Tx WMM

Number of Wi-fi Multimedia (WMMWi-Fi Multimedia. WMM is also known as WME. It refers to a Wi-Fi Alliance interoperability certification, based on the IEEE 802.11e standard. It provides basic QoS features to IEEE 802.11 networks. WMM prioritizes traffic according to four ACs: voice (AC_VO), video (AC_VI), best effort (AC_BE), and background (AC_BK).) packets transmitted for the following access categories. If the AP has not transmitted packets in a category type, this data row will not appear in the output of the command.

Tx WMMWi-Fi Multimedia. WMM is also known as WME. It refers to a Wi-Fi Alliance interoperability certification, based on the IEEE 802.11e standard. It provides basic QoS features to IEEE 802.11 networks. WMM prioritizes traffic according to four ACs: voice (AC_VO), video (AC_VI), best effort (AC_BE), and background (AC_BK). [BE]: Best Effort

Tx WMMWi-Fi Multimedia. WMM is also known as WME. It refers to a Wi-Fi Alliance interoperability certification, based on the IEEE 802.11e standard. It provides basic QoS features to IEEE 802.11 networks. WMM prioritizes traffic according to four ACs: voice (AC_VO), video (AC_VI), best effort (AC_BE), and background (AC_BK). [BK]: Background

Tx WMMWi-Fi Multimedia. WMM is also known as WME. It refers to a Wi-Fi Alliance interoperability certification, based on the IEEE 802.11e standard. It provides basic QoS features to IEEE 802.11 networks. WMM prioritizes traffic according to four ACs: voice (AC_VO), video (AC_VI), best effort (AC_BE), and background (AC_BK). [VO]: VoIPVoice over IP. VoIP allows transmission of voice and multimedia content over an IP network.

Tx WMMWi-Fi Multimedia. WMM is also known as WME. It refers to a Wi-Fi Alliance interoperability certification, based on the IEEE 802.11e standard. It provides basic QoS features to IEEE 802.11 networks. WMM prioritizes traffic according to four ACs: voice (AC_VO), video (AC_VI), best effort (AC_BE), and background (AC_BK). [VI]: Video

Tx Data <value> Mbps

Number of frames transmitted at the specified rate, (MbpsMegabits per second).

Tx Data Bytes <value> Mbps

Number of bytes of data transmitted at the specified rate, (MbpsMegabits per second).

UAPSD OverflowDrop

Number of packets dropped due to Unscheduled Automatic Power Save Delivery (U‑APSD) overflow.

Tx Mgmt Bytes

Total management frame bytes transmitted.

Tx Beacons Bytes

Total number of Beacon frame bytes transmitted.

Tx AMSDU pkt count

Total number of AMSDU bytes transmitted.

Tx Data Frames/Bytes 24 Mbps
(Mon)

Total number of data frames and corresponding bytes transmitted at rate (12-24)

Tx Data Frames/Bytes 36 Mbps (Mon)

Total number of data frames and corresponding bytes transmitted at rate (24-36)

Tx Data Frames/Bytes 54 Mbps (Mon)

Total number of data frames and corresponding bytes transmitted at rate (36-54)

Tx Data Frames/Bytes 72 Mbps (Mon)

Total number of data frames and corresponding bytes transmitted at rate (54-72)

Tx Data Frames/Bytes 108 Mbps (Mon)

Total number of data frames and corresponding bytes transmitted at rate (72-108)

Tx Data Frames MCS 0

Total number of data frames transmitted at rate of MCSModulation and Coding Scheme. MCS is used as a parameter to determine the data rate of a wireless connection for high throughput. 0

Tx Data Frames MCS 1

Total number of data frames transmitted at rate of MCSModulation and Coding Scheme. MCS is used as a parameter to determine the data rate of a wireless connection for high throughput. 1

Tx Data Frames MCS 2

Total number of data frames transmitted at rate of MCSModulation and Coding Scheme. MCS is used as a parameter to determine the data rate of a wireless connection for high throughput. 2

Tx Data Frames MCS 3

Total number of data frames transmitted at rate of MCSModulation and Coding Scheme. MCS is used as a parameter to determine the data rate of a wireless connection for high throughput. 3

Tx Data Frames MCS 4

Total number of data frames transmitted at rate of MCSModulation and Coding Scheme. MCS is used as a parameter to determine the data rate of a wireless connection for high throughput. 4

Tx Data Frames MCS 5

Total number of data frames transmitted at rate of MCSModulation and Coding Scheme. MCS is used as a parameter to determine the data rate of a wireless connection for high throughput. 5

Tx Data Frames MCS 6

Total number of data frames transmitted at rate of MCSModulation and Coding Scheme. MCS is used as a parameter to determine the data rate of a wireless connection for high throughput. 6

Tx Data Frames MCS 7

Total number of data frames transmitted at rate of MCSModulation and Coding Scheme. MCS is used as a parameter to determine the data rate of a wireless connection for high throughput. 7

Tx Data Frames MCS 8

Total number of data frames transmitted at rate of MCSModulation and Coding Scheme. MCS is used as a parameter to determine the data rate of a wireless connection for high throughput. 8

Tx Data Frames MCS 9

Total number of data frames transmitted at rate of MCSModulation and Coding Scheme. MCS is used as a parameter to determine the data rate of a wireless connection for high throughput. 9

Tx Data Frames Legacy

Total number of data frames transmitted at legacy rate

Tx Data Frames MCS

Total number of data frames transmitted at MCSModulation and Coding Scheme. MCS is used as a parameter to determine the data rate of a wireless connection for high throughput. rate

Tx Data Frames NSS1

Total number of data frames transmitted 1 spacial stream

Tx Data Frames NSS2

Total number of data frames transmitted with 2 spacial stream

Tx Data Frames NSS3

Total number of data frames transmitted with 3 spacial stream

Tx Data Frames Short-GI(HALF)

Total number of data frames transmitted with short GI

Tx Data Frames Long-GI(FULL

Total number of data frames transmitted with long GI

Tx Data Frames BW20

Total number of data frames transmitted at 20 Mhz

Tx Data Frames BW40

Total number of data frames transmitted at 40 Mhz

Tx Data Frames BW80

Total number of data frames transmitted at 80 Mhz

Tx Data Frames BW160

Total number of data frames transmitted at 160 Mhz

Rx Last SNR

The last recorded signal-to-noise ratio.

Rx Last SNR CTL0

The signal-to-noise ratio for the last received data packet on the primary (control) channel 0. This parameter is only displayed for APs operating in 40 Mhz mode.

Rx Last SNR CTL1

The signal-to-noise ratio for the last received data packet on the secondary (control) channel 1. This parameter is only displayed for APs operating in 40 Mhz mode.

Rx Last SNR CTL2

The signal-to-noise ratio for the last received data packet on the secondary (control) channel 2. This parameter is only displayed for APs operating in 40 Mhz mode.

Rx Last ACK SNR

Signal-to-noise ratio for the last received ACK packet.

Rx Last ACK SNR CTL0

Signal-to-noise ratio for the last received ACK packet on the primary (control) channel 0. This parameter is only displayed for APs operating in 40 Mhz mode.

Rx Last ACK SNR CTL1

Signal-to-noise ratio for the last received ACK packet on the primary (control) channel 1. This parameter is only displayed for APs operating in 40 Mhz mode.

Rx Last ACK SNR CTL2

Signal-to-noise ratio for the last received ACK packet on the primary (control) channel 2. This parameter is only displayed for APs operating in 40 Mhz mode.

Rx Frames Received

Number of frames received.

Rx retry frames

Number of retried frames received.

Rx data frames retried

Number of retried data frames received.

Rx Data Frames

Number of data frames received.

Rx Data Bytes

Number of data bytes received.

Rx Time Data

Total time spent on frames successfully received.

Rx Duplicate Frames

Number of duplicate frames received.

Rx Broadcast Data Frames

Number of broadcast frames received.

Rx Multicast Data Frames

Number of multicast frames received.

Rx Unicast Data Frames

Number of unicast frames received.

Rx Null Data Frames

Number of null data frames received.

Rx Mgmt Frames

Number of management frames received.

Control Frames

Number of control frames received.

Frames To Me

Number of frames received that are addressed to the specified BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly..

Bytes To Me

Number of bytes received that are addressed to the specified BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly..

Time To Me

Total time spent receiving frames sent to a specified BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly..

Rx Probe Requests

Number of probe requests received.

RX PS Poll Frames

Power-Save Poll (PS-Poll) frames received. When a client exits a power-saving mode, it transmits a PS-Poll frame to the AP to retrieve any frames buffered while it was in power-saving mode.

RX STBC Frames

Number of received frames with STBCSpace-Time Block Coding. STBC is a technique used in wireless communications to transmit multiple copies of a data stream across a number of antennas and to exploit the various received versions of the data to improve the reliability of data transfer. enabled.

RX LDPC Frames

Number of received frames with LDPCLow-Density Parity-Check. LDPC is a method of transmitting a message over a noisy transmission channel using a linear error correcting code. An LDPC is constructed using a sparse bipartite graph. enabled.

Rx Data <value> Mbps

Number of frames received at the specified rate, (MbpsMegabits per second).

Rx Data Bytes <value> Mbps

Number of bytes of data received at the specified rate, (MbpsMegabits per second).

Command History

Command

Description

ArubaOS 8.3.0.0

The output of this command now includes MCSModulation and Coding Scheme. MCS is used as a parameter to determine the data rate of a wireless connection for high throughput. bucket mapping information channel width, number of spatial streams, and guard interval information of 802.11ac802.11ac is a wireless networking standard in the 802.11 family that provides high-throughput WLANs on the 5 GHz band. APs.

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/