You are here: Home > CLI Commands > Just_CLI_Topics > show ap debug bucketmap-state

show ap debug bucketmap-state

show ap debug bucketmap-state {essid <essid> | filter-by {ap-name <ap-name> | bssid <bssid> | ip-addr <ip-addr> | ip6-addr <ip6-addr>} | uac {bucket <bucket> | dormant {essid <essid> | filter-by {ap-name <ap-name> | bssid <bssid> | ip-addr <ip-addr> | ip6-addr <ip6-addr>} | verbose {essid <essid> | filter-by {ap-name <ap-name> | bssid <bssid> | ip-addr <ip-addr> | ip6-addr <ip6-addr>}} | uac-ip <uac-ip> | uac-ip6 <uac-ip6>}} | verbose {essid <essid> | filter-by {ap-name <ap-name> | bssid <bssid> | ip-addr <ip-addr> | ip6-addr <ip6-addr>} | uac {bucket <bucket> | dormant {essid <essid> | filter-by {ap-name <ap-name> | bssid <bssid> | ip-addr <ip-addr> | ip6-addr <ip6-addr>}}}}}

Description

This command shows clients in different buckets.

Syntax

Parameter

Description

essid <essid>

Shows clients filtered by ESSIDExtended Service Set Identifier. ESSID refers to the ID used for identifying an extended service set..

filter-by {ap-name <ap-name> |

bssid <bssid> |

ip-addr <ip-addr> |

ip6-addr <ip6-addr>}

Shows clients filtered by name of AP, BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly., IP address or IPv6 address.

uac {bucket <bucket> |

dormant {essid <essid> |

filter-by {ap-name <ap-name> |

bssid <bssid> | ip-addr <ip-addr> |

ip6-addr <ip6-addr>} |

verbose {essid <essid> |

filter-by {ap-name <ap-name> |

bssid <bssid> | ip-addr <ip-addr> |

ip6-addr <ip6-addr>}} |

uac-ip <uac-ip> |

uac-ip6 <uac-ip6>}}

Shows clients filtered by bucket index, dormancy, IP address, or IPv6 address.

verbose {essid <essid> |

filter-by {ap-name <ap-name> |

bssid <bssid> | ip-addr <ip-addr>

| ip6-addr <ip6-addr>} |

uac {bucket <bucket> |

dormant {essid <essid> |

filter-by {ap-name <ap-name> |

bssid <bssid> |

ip-addr <ip-addr> |

ip6-addr <ip6-addr>}}}}

Shows clients filtered by bucket index, dormancy, IP address, or IPv6 address

Usage Guidelines

This command shows clients in different buckets. For the remaining parameters, see the command syntax.

Example

Access the CLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. and use the following command to show clients filtered by the ESSIDExtended Service Set Identifier. ESSID refers to the ID used for identifying an extended service set. test:

(host) [mynode] #show ap debug bucketmap-state essid test

 

Essid "test"

Number of updates 1; Time since last update 1h:19m:24s

Activations: New Bmap=0, Node Down=0

Bucketmap State

---------------

Index UAC status

----- --- ------

0 10.15.146.3 (self) Up

1 10.15.146.4 Up

2 10.15.146.5 Up

3 10.15.146.6 Up

Stations in buckets for Essid SriniZone1TestEssid

-------------------------------------------------

BucketIndex MAC BSSID AID AP Name UAC IP

----------- --- ----- --- ------- ------

Total Stations=0 Total Active=0 Total Dormant=0

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable mode on Mobility Master.

/*]]>*/