You are here: Home > CLI Commands > Just_CLI_Topics > show ap debug client-mgmt-counters

show ap debug client-mgmt-counters

show ap debug client-mgmt-counters

Description

This command shows the message counters.

Syntax

No parameters.

Usage Guidelines

This command shows the numbers of each type of message sent from a client to an AP. Use this information to troubleshoot problems on an AP.

Examples

The following example shows the client management counters.

(host) [mynode] #show ap debug client-mgmt-counters

 

Counters

--------

Name Value

---- -----

41228 3

Tunnel DACL 7

STM Restart Notification to Auth 1

Associations Dropped Due to Auth Throttling 0

PubSub Messages Rcvd 992

User Mon Messages 0

Auth .1x Queue: High, Pending 450, 0

Reg timer calls 141274

BSS publish Failures 0

Tunnel Timeouts 0

Unreg/Wipeout Requests 0 0

Auth Resp for unknown sap 0

Auth enet Resp Tout 0

SOS Rx Msg Count: tunop ctrl dtun_data tun_data misc 0 0 0 0 0 0 0 0 0 0 0

Received Client Ageout Messages from APs 0

Received stale Entries 0

Received stale Entries in Deauth (Deauths from clients) 0

Processed stale Entries in Deauth 0

Stale entry error - BSS not found 0

Stale entry error - STA not found in Deauth 0

Stale entry error - failed to clear STA in Deauth 0

Stale entry error - Deauth bad length 0

Stale entry error - special handling 0

Sta down: total flag_unmatch not_assoc papi_send papi_ok papi_fail 0 0 0 0 0 0

Sta up: total flag_unmatch not_assoc papi_send papi_ok papi_fail 0 0 0 0 0 0

AMSDU Updates sent to SOS from STM 0

Invalid tunnel-id (0) 0

HBT tunnel not found on timeout 0

AID-MAC mismatch 0

Command History

Command

Description

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/