You are here: Home > CLI Commands > Just_CLI_Topics > show ap debug crash-info

show ap debug crash-info

show ap debug crash-info {ap-name <ap-name>|ip-addr <ip-addr> ip6-addr <ip6-addr>}

Description

Show crash log information (if it exists) for an individual AP. The stored information is cleared from the flash after the AP reboots.

Syntax

Parameter

Description

ap-name <ap-name>

Show crash information for an AP with a specified name.

ip-addr <ip-addr>

Show crash information for an AP with a specified IP address by entering an IP address in dotted-decimal format.

ip6-addr <ip6-addr>

Show crash information for an AP with a specified IPv6 address by entering an IP address in dotted-decimal format.

Example

The output of this command shows a partial sample crash log information for an AP named MyAP

(host) #show ap debug crash-info ap-name MyAP

 

<4>ArubaOS Version x.x.x.x (build xxxx / label #xxxx)

<4>Built by p4build@cartman on 2012-07-29 at 14:44:06 PST (gcc version x.x.x

Cavium Networks Version: 1.4.0, build 58)

<4>CVMSEG size: 2 cache lines (256 bytes)

<4>Setting flash physical map for 16MB flash at 0x1ec00000

<4>Determined physical RAM map:

<7>On node 0 totalpages: 16384

<7> DMA zone: 16384 pages, LIFO batch:3

<7> DMA32 zone: 0 pages, LIFO batch:0

<7> Normal zone: 0 pages, LIFO batch:0

<7> HighMem zone: 0 pages, LIFO batch:0

<4>Primary instruction cache 32kB, virtually tagged, 4 way, 64 sets, linesize 128 bytes.

<4>Primary data cache 16kB, 64-way, 2 sets, linesize 128 bytes.

<4>Using 500.000 MHz high precision timer. cycles_per_jiffy=1000000

<6>Memory: 56636k/65536k available (1925k kernel code, 8840k reserved, 575k data, 2716k init, 0k highmem)

<4>Calibrating delay using timer specific routine.. 1000.32 BogoMIPS (lpj=1000322)

<4> available.

<4>Checking for the multiply/shift bug... no.

<4>Checking for the daddi bug... no.

<4>Checking for the daddiu bug... no.

<5>detected lzma initramfs

<5>initramfs: LZMA lc=3,lp=0,pb=2,dictSize=8388608,origSize=15217664

<5>LZMA initramfs

Command History

Command

Description

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Config or Enable mode on Mobility Master.

/*]]>*/