You are here: Home > CLI Commands > Just_CLI_Topics > show ap debug esl-status

show ap debug esl-status

show ap debug esl-status {<ap-name>|<ip-addr>|<ip6-addr>}

Description

This command displays the ESL status of an AP.

Syntax

Parameter

Description

ap-name

The name of the AP.

ip-addr

The IP address of the AP.

ip6-addr

The IPv6 address of the AP.

Usage Guidelines

This command displays the values for ESL Server, ESL Channel, ESL Radio, Configuration Status, and the ESL Dongle ID of an AP.

Examples

The following example shows the ESL status of an AP:

(Host) *[mynode] #show ap debug esl-status ap-name AP32x_03

ESL Status

----------

Item Value

---- -----

ESL Server 0.0.0.0

ESL Channel N/A

ESL Radio Coexistence Enabled

CONFIG State INITIALIZED

ESL Dongle ID N/A

Command History

Command

Description

ArubaOS 8.4.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

AP-303H, 300 Series access points, 310 Series access points, 320 Series access points, 330 Series access points, 340 Series access points, and 510 Series access points

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/