You are here: Home > CLI Commands > Just_CLI_Topics > show ap remote debug flash-config

show ap remote debug flash-config

show ap remote debug flash-config {ap-name <ap-name>|bssid <bssid>|ip-addr <ip-addr>|ip6-addr <ip6-addr>} acls | vap <vap> | vaps

Description

Show the remote APRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link. configuration stored in flash memory.

Syntax

Parameter

Description

ap-name <ap-name>

Shows debugging data for an AP with a specific name.

bssid <bssid>

Shows data for a specific BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly. on an AP. The BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly. is usually the MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of the AP.

ip-addr <ip-addr>

Shows data for an AP with a specific IP address by entering its IP address in dotted-decimal format.

ip6-addr <ip6-addr>

Shows data for an AP with a specific IP6 address by entering its IP6 address in dotted-decimal format.

acls

Displays ACLsAccess Control List. ACL is a common way of restricting certain types of traffic on a physical port. of offline virtual APs.

vap <vap>

Displays the configuration of a specific offline virtual AP by entering the name of a virtual AP.

vaps

Displays the current number of offline virtual APs.

Example

The output of this command can be used to debug problems with a remote APRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link.. The command below shows statistics for an AP with the IP address 192.0.2.64.

(host) [mynode] #show ap remote debug flash-config ip-addr 192.0.2.64

acls

Offline ACLs

------------

Item Value

---- -----

Native VLAN 1

DHCP VLAN N/A

DHCP ADDR 192.168.11.1

DHCP POOL NETMASK 255.255.255.0

DHCP POOL START 192.168.11.2

DHCP POOL END 192.168.11.254

DHCP DNS SERVER 0.0.0.0

DHCP ROUTER 192.168.11.1

DHCP DNS DOMAIN mycompany

DHCP LEASE 0

Session ACL N/A

Session ACL Name N/A

Session ACL Count N/A

Session Aces N/A

ACL 1 1

ACL 1 Name logon

ACL 1 Count 21

Aces 1 16 1 4294

...

The output of this command includes the following information:

Column

Description

Native VLAN

VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. ID of the native VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN..

DHCP VLAN

VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. ID of Remote APRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link. DHCPDynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network.  server used when the controller is unreachable.

DHCP ADDR

IP Address used as DHCPDynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network.  Server Identifier.

DHCP POOL NETMASK

NetmaskNetmask is a 32-bit mask used for segregating IP address into subnets. Netmask defines the class and range of IP addresses. of the DHCPDynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network.  server pool.

DHCP POOL START

IP Address used as the start of a range of addresses for a DHCPDynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network.  pool.

DHCP POOL END

IP Address used as the end of a range of addresses for a DHCPDynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network.  pool.

DHCP DNS SERVER

IP Address for the DHCPDynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network.  DNSDomain Name System. A DNS server functions as a phone book for the intranet and Internet users. It converts human-readable computer host names into IP addresses and IP addresses into host names. It stores several records for a domain name such as an address 'A' record, name server (NS), and mail exchanger (MX) records. The Address 'A' record is the most important record that is stored in a DNS server, because it provides the required IP address for a network peripheral or element. server.

DHCP ROUTER

IP Address for the DHCPDynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network.  default router.

DHCP DNS DOMAIN

Domain name for the DHCPDynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network.  DNSDomain Name System. A DNS server functions as a phone book for the intranet and Internet users. It converts human-readable computer host names into IP addresses and IP addresses into host names. It stores several records for a domain name such as an address 'A' record, name server (NS), and mail exchanger (MX) records. The Address 'A' record is the most important record that is stored in a DNS server, because it provides the required IP address for a network peripheral or element. server.

DHCP LEASE

Length of DHCPDynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network.  DNSDomain Name System. A DNS server functions as a phone book for the intranet and Internet users. It converts human-readable computer host names into IP addresses and IP addresses into host names. It stores several records for a domain name such as an address 'A' record, name server (NS), and mail exchanger (MX) records. The Address 'A' record is the most important record that is stored in a DNS server, because it provides the required IP address for a network peripheral or element. leases in days. If this parameter displays a zero (0) the DHCPDynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network.  lease is has no defined end.

Session ACL

Name of the ACLAccess Control List. ACL is a common way of restricting certain types of traffic on a physical port. applied to the user session.

Session ACL name

Name of the ACLAccess Control List. ACL is a common way of restricting certain types of traffic on a physical port. applied to the user session.

Session ACL count

Number of rules in the applied to the user session.

Session Aces

A list of the individual rules in the session ACLAccess Control List. ACL is a common way of restricting certain types of traffic on a physical port..

ACL 1

This parameter shows the position of an individual ACLAccess Control List. ACL is a common way of restricting certain types of traffic on a physical port..

ACL1 Name

Name of the ACLAccess Control List. ACL is a common way of restricting certain types of traffic on a physical port. in the first position.

ACL1 Count

Number of rules in the specified ACLAccess Control List. ACL is a common way of restricting certain types of traffic on a physical port..

ACL1 Aces

A list of the individual rules in the specified ACLAccess Control List. ACL is a common way of restricting certain types of traffic on a physical port..

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable or Config mode on the managed device or controller where the AP terminates.

/*]]>*/