You are here: Home > CLI Commands > Just_CLI_Topics > show ap debug lldp counters

show ap debug lldp counters

show ap debug lldp counters {ap-name <ap-name>}|{ip-addr <ip-addr>}|{ip6-addr <ip6-addr>} [interface <port-string>]

Description

This command shows LLDPLink Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol in the Internet Protocol suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, which is principally a wired Ethernet. statistics of an AP.

Syntax

Parameter

Description

ap-name <ap-name>

Shows LLDPLink Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol in the Internet Protocol suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, which is principally a wired Ethernet. statistics of an AP for specified AP name.

ip-addr <ip-addr>

Shows LLDPLink Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol in the Internet Protocol suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, which is principally a wired Ethernet. statistics of an AP for specified IP address.

ip6-addr <ip6-addr>

Shows LLDPLink Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol in the Internet Protocol suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, which is principally a wired Ethernet. statistics of an AP for specified IPv6 address.

interface <port-string>

Shows LLDPLink Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol in the Internet Protocol suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, which is principally a wired Ethernet. statistics for specified interface of an AP.

Usage Guidelines

This command shows LLDPLink Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol in the Internet Protocol suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, which is principally a wired Ethernet. statistics of an AP. For the remaining parameters, see the command syntax.

Example

The following example shows radio scanning of an AP named ap-205:

(host) [mynode] #show ap debug lldp counters ap-name ap-205

 

LLDP Counters

-------------

Interface Received Unknown TLVs Malformed Overflow Transmitted

--------- -------- ------------ --------- -------- -----------

bond0 49937 0 0 0 49914

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable mode on Mobility Master.

/*]]>*/