You are here: Home > CLI Commands > Just_CLI_Topics > show ap debug log-config

show ap debug log-config

show ap debug log-config {ap-name <ap-name>}|{ip-addr <ip-addr>}|{ip6-addr <ip6-addr>}

Description

This command shows AP log configuration.

Syntax

Parameter

Description

ap-name <ap-name>

Shows AP log configuration for specified AP name.

ip-addr <ip-addr>

Shows AP log configuration for specified IP address.

ip6-addr <ip6-addr>

Shows AP log configuration for specified IPv6 address.

Usage Guidelines

This command shows AP log configuration. For the remaining parameters, see the command syntax.

Example

The following example shows an AP named ap-205 is not registered with managed device:

(host) [mynode] #show ap debug log-config ap-name ap-205

AP is not registered with this switch

Command History:

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable mode on Mobility Master.

/*]]>*/