You are here: Home > CLI Commands > Just_CLI_Topics > show ap remote debug-mcast-forwarder

show ap remote debug-mcast-forwarder

show ap remote debug-mcast-forwarder {ap-name <ap-name> | ip-addr <ip-addr>

Description

This command displays the Mcast forwarder status for the selected AP.

Syntax

Parameter

Description

ap-name <ap-name>

Shows debugging information for a specific AP.

ip-addr <ip-addr>

Shows debugging information for an AP with a specific IP address by entering its IP address in dotted-decimal format.

Usage Guidelines

The optional output modifiers | begin , | exclude, and | include help you display those lines that begin, include, exclude, respectively, the line expression given in the CLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. command. The | redirect-output modifier helps you redirect the command output.

Examples

Use this command to display the mcast forwarder status for an AP.

(host) [mynode] #show ap remote debug-mcast-forwarder ip-addr 191.191.191.323

Status (0): OFF, VLANs: 1

Mcast Aggregation Forwarder election status:

--------------------------------------------

VLAN Forwarder TX RX

---- --------- -- --

1 itself 0 0

Forwarder:mcast packets forwarder on the VLAN

TX:output announcement number for forwarder election on the VLAN

RX:input announcement number for forwarder election on the VLAN

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable or Config mode on the managed device or controller where the AP terminates.

/*]]>*/