You are here: Home > CLI Commands > Just_CLI_Topics > show ap remote debug client-mgmt-counters

show ap remote debug client-mgmt-counters

show ap remote debug client-mgmt-counters {ap-name <ap-name> | bssid <bssid> | ip-addr <ip-addr> | ip6-addr <ip6-addr>}

Description

Shows the number of each type of message from the clients of an AP. This information can be used to troubleshoot problems on an AP.

Syntax

Parameter

Description

show ap remote debug client-mgmt-counters

Use this command to display message counters.

ap-name <ap-name>

To show message counters by AP name.

bssid <bssid>

To show message counters by MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of AP.

ip-addr <ip-addr>

To show message counters by IP address of AP.

ip6-addr <ip6-addr>

To show message counters by IPv6 address of AP.

Usage Guidelines

The optional output modifiers | begin , | exclude, and | include help you display those lines that begin, include, exclude, respectively, the line expression given in the CLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. command. The | redirect-output modifier helps you redirect the command output.

Examples

The output of this command shows client management counters for the specified AP.

(host)#show ap remote debug client-mgmt-counters ap-name ap120-3

Counters

--------

Name Value

---- -----

Validate Client 512

AP Stats Update Message 557750

3087 6

Tunnel VLAN Membership 4493

Update STA Tunnel Request 229

Update STA Tunnel Response 229

ARM Update 808921

ARM Propagate 590567

ARM Neighbor Assigned 55396

STM SAP Down 19

AP Message 192

STA On Call Message 12164

STA Message 19750

STA SIP authenticate Message 10919

STA Deauthenticate 707

Stat Update V3 441447

Remote AP State 371330

AP Message Response 164

assoc-req 4358

assoc-resp 4358

reassoc-req 950

reassoc-resp 950

disassoc 452

deauth 5117

sapcp 351131

 

The output of this command includes the following information:

Parameter

Description

Validate Client

Number of times a client was validated.

AP Stats Update Message

Number of times an AP updated its statistics with the managed device.

ARM Update

Number of times an AP has changed its ARMAdaptive Radio Management. ARM dynamically monitors and adjusts the network to ensure that all users are allowed ready access. It enables full utilization of the available spectrum to support maximum number of users by intelligently choosing the best RF channel and transmit power for APs in their current RF environment. settings.

STA On Call Message

Number of counters indicating that a station has an active phone call.

STA SIP authenticate Message

Number of messages indicating that a telephone has completed SIPSession Initiation Protocol. SIP is used for signaling and controlling multimedia communication session such as voice and video calls. registration and authentication.

STA Deauthenticate

Number of times a station sent a message to an AP to deauthenticate a client.

assoc-req

Number of 802.11802.11 is an evolving family of specifications for wireless LANs developed by a working group of the Institute of Electrical and Electronics Engineers (IEEE). 802.11 standards use the Ethernet protocol and Carrier Sense Multiple Access with collision avoidance (CSMA/CA) for path sharing. association request management frames from the controller.

assoc-resp

Number of 802.11802.11 is an evolving family of specifications for wireless LANs developed by a working group of the Institute of Electrical and Electronics Engineers (IEEE). 802.11 standards use the Ethernet protocol and Carrier Sense Multiple Access with collision avoidance (CSMA/CA) for path sharing. association responses to the controller.

reassoc-req

Number of 802.11802.11 is an evolving family of specifications for wireless LANs developed by a working group of the Institute of Electrical and Electronics Engineers (IEEE). 802.11 standards use the Ethernet protocol and Carrier Sense Multiple Access with collision avoidance (CSMA/CA) for path sharing. reassociation requests to the controller.

reassoc-resp

Number of 802.11802.11 is an evolving family of specifications for wireless LANs developed by a working group of the Institute of Electrical and Electronics Engineers (IEEE). 802.11 standards use the Ethernet protocol and Carrier Sense Multiple Access with collision avoidance (CSMA/CA) for path sharing. reassociation responses from the controller.

disassoc

Number of 802.11802.11 is an evolving family of specifications for wireless LANs developed by a working group of the Institute of Electrical and Electronics Engineers (IEEE). 802.11 standards use the Ethernet protocol and Carrier Sense Multiple Access with collision avoidance (CSMA/CA) for path sharing. disassociation messages to the controller.

deauth

Number of 802.11802.11 is an evolving family of specifications for wireless LANs developed by a working group of the Institute of Electrical and Electronics Engineers (IEEE). 802.11 standards use the Ethernet protocol and Carrier Sense Multiple Access with collision avoidance (CSMA/CA) for path sharing. deauthorization messages from the controller.

Command History

Release

Modification

ArubaOS 8.2.0.0

The ip6-addr parameter was added.

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable or Config mode on the managed device or controller where the AP terminates.

/*]]>*/