You are here: Home > CLI Commands > Just_CLI_Topics > show ap debug multizone

show ap debug multizone

show ap debug multizone

ap-name

ip-addr

ip6-addr

Description

Displays the MultiZone configured for an AP.

Syntax

Parameter

Description

ap-name

Name of AP.

ip-addr

IP Address of AP.

ip6-addr

IPv6 address of AP.

Example

The following example shows the MultiZone configured for a particular AP:

(host) [mynode] (config) #show ap debug multizone ap-name RFCage05_AP214_2_C_6_7031

 

Multizone Table

---------------

Zone Configured IP Serving IP Max Vaps Allowed Nodes Flags

---- ------------- ---------- ---------------- ----- -----

0 10.16.84.10 10.16.84.10 13 (0~12) 1 2

1 2008::abc:90:90::4 2008::abc:90:90::4 3 (0-2) 1 V

Flags: C = Cluster; L = Limited nodes; N = Nodes in other zones; 2 = Using IKE version 2; M = Image mismatch; V = IP version mismatch

Number of datazones:1

Command History

Release

Modification

ArubaOS 8.4.0.0

The output of the show ap debug multizone command was modified to include V flags that indicate the IP version mismatch between primary zone and data zone configuration.

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Config mode in managed devices.

/*]]>*/