You are here: Home > CLI Commands > Just_CLI_Topics > show ap debug port status

show ap debug port status

show ap debug port status {ap-name <ap-name>|bssid <bssid>|ip-addr <ip-addr>|ip6-addr <ip6-addr>}

Description

Shows the status of the AP's wired ports.

Syntax

Parameter

Description

ap-name <ap-name>

Name of the AP.

bssid <bssid>

BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly. of the AP.

ip-addr <ip-addr>

IP address of the AP.

ip6-addr <ip6-addr>

IPv6 address of the AP.

Examples

The output of the command displays the wired port status of an AP named LocalAP1. In this example, the output is divided into multiple sections to fit better on the pages of this document. In the actual CLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions., it appears in a single long table.

(host) [mynode] #show ap debug port status ap-name LocalAP1

 

AP "LocalAP1" Port Status

-----------------------

Port MAC Type Forward Mode Admin Oper Speed Duplex 802.3az 802.3bz PoE

---- --- ---- ------------ ----- ---- ----- ------ ------- ------- ----

0 00:1a:1e:10:05:1a GE N/A enabled up 1 Gb/s full N/A N/A N/A

1 00:1a:1e:10:05:1b FE tunnel enabled up 100 Mb/s full N/A N/A N/A

2 00:1a:1e:10:05:1c FE tunnel enabled down N/A N/A N/A N/A N/A

3 00:1a:1e:10:05:1d FE N/A disabled down N/A N/A N/A N/A N/A

 

STP TX-Packets TX-Bytes RX-Packets RX-Bytes

--- ---------- -------- ---------- --------

N/A 23697 3338307 27449 8471871

Forwarding 12185 6593226 18436 1758272

Disabled 0 0 0 0

Off 0 0 0 0

Command History

Version

Modification

ArubaOS 8.3.0.0

A new column 802.3bz displays the 802.3bz state of the wired port.

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/