You are here: Home > CLI Commands > Just_CLI_Topics > show ap debug ses-esl-log

show ap debug ses-esl-log

show ap debug ses-esl-log {<ap-name>|<ip-addr>|<ip6-addr>}

Description

This command displays the SES-Imagatog's ESL server logs for an AP.

Syntax

Parameter

Description

ap-name

The name of the AP.

ip-addr

The IP address of the AP.

ip6-addr

The IPv6 address of the AP.

Usage Guidelines

This command displays the SES-Imagotog’s ESL daemon debug logs for an AP.

Examples

The following example shows the SES-Imagatog's ESL server logs for an AP:

(Host) *[mynode] (config) #show ap debug ses-esl-log ap-name AP32x_03

[11572]2018-12-14 05:32:50 Startup summary(local config):

[11572]2018-12-14 05:32:50 Ap-Id configured via CLI: false

[11572]2018-12-14 05:32:50 Target serial device: /dev/ttyUSB0

[11572]2018-12-14 05:32:50 Sync Protocol version: 0

[11572]2018-12-14 05:32:50 Max. window size: 14

[11572]2018-12-14 05:32:50 Output power: C

[11572]2018-12-14 05:32:50 Max. output power: A

[11572]2018-12-14 05:32:50 Always force firmware update: true

[11572]2018-12-14 05:32:50 TCP listen port: 7353

[11572]2018-12-14 05:32:50 SSL enabled: false

[11572]2018-12-14 05:32:50 Control channel disabled: false

[11572]2018-12-14 05:32:50 Connection-mode: Outbound

[11572]2018-12-14 05:32:50 Apc-address:

[11572]2018-12-14 05:32:50 Apc-port: 7353

[11572]2018-12-14 05:32:50 Coex. level: full

[11572]2018-12-14 05:32:50 Coex. signal shift (micros): -6000

[11572]2018-12-14 05:32:50 Coex. signal covers for jitter enabled: true

[11572]2018-12-14 05:32:50 Coex. signal additional covering (micros): 2000

[11572]2018-12-14 05:32:50 Startup summary(protocol config):

[11572]2018-12-14 05:32:50 Batch-Size: 16

[11572]2018-12-14 05:32:50 Threshold: 32

[11572]2018-12-14 05:32:50 Communication restart sync batches slot jump multiplier: 3

[11572]2018-12-14 05:32:50 Number of buffered sync batches: 2

[11572]2018-12-14 05:32:50 Sync buffer size: 64

[11572]2018-12-14 05:32:50 Sync max. slot offset: 320

Command History

Command

Description

ArubaOS 8.4.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

AP-303H, 300 Series access points, 310 Series access points, 320 Series access points, 330 Series access points, 340 Series access points, and 510 Series access points

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/