You are here: Home > CLI Commands > Just_CLI_Topics > show ap remote debug stm cluster-nodestate

show ap remote debug stm cluster-nodestate

show ap remote debug stm cluster-nodestate {ap-name <ap-name> | ip-addr <ip-addr> | ip6-addr <ip6-addr>}

Description

This command shows the cluster node state in AP.

Syntax

Parameter

Description

ap-name <ap-name>

Shows the cluster node state for specified AP name.

ip-addr <ip-addr>

Shows the cluster node state for specified IP address.

ip6-addr <ip6-addr>

Shows the cluster node state for specified IPv6 address.

Usage Guidelines

The optional output modifiers | begin , | exclude, and | include help you display those lines that begin, include, exclude, respectively, the line expression given in the CLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. command. The | redirect-output modifier helps you redirect the command output.

Example

The following is an example for executing this command:

(host) [mynode] #show ap remote debug stm cluster-nodestate ap-name ap-205

Command History

Release

Modification

ArubaOS 8.2.0.0

The ip6-addr parameter was added.

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable or Config mode on the managed device or controller where the AP terminates.

/*]]>*/