You are here: Home > CLI Commands > Just_CLI_Topics > show ap debug trace-addr

show ap debug trace-addr

show ap debug trace-addr

Description

Show MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. addresses in the trace buffer.

Usage Guidelines

Use this command to troubleshoot wireless clients that are being traced for 802.11802.11 is an evolving family of specifications for wireless LANs developed by a working group of the Institute of Electrical and Electronics Engineers (IEEE). 802.11 standards use the Ethernet protocol and Carrier Sense Multiple Access with collision avoidance (CSMA/CA) for path sharing. communication

Examples

The output of the command shows the Trace List table. If no wireless clients are being traced, this table will be empty.

(host) #show ap debug trace-addr

 

Trace List

----------

MAC Address

-----------

00:1a:1e:c5:ca:b4

00:1a:1e:c5:d6:46

00:1a:1e:c5:d7:40

00:1a:1e:c5:d7:64

00:1a:1e:c5:d9:56

00:1a:1e:c5:d9:b0

Command History

Command

Description

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/