You are here: Home > CLI Commands > Just_CLI_Topics > show ap debug usb ap-name

show ap debug usb

show ap debug usb

ap-name <ap-name>

ip-addr <ip-addr>

ip6-addr <ip6-addr>

Description

This command displays the USB information provisioned on the RAP.

Syntax

Parameter

Description

ap-name <ap-name>

Show system status data for an AP with a specific name.

ip-addr <ip-addr>

Show system status data for an AP with a specific IP address by entering an IP address in dotted-decimal format.

ip6-addr <ip6-addr>

Show system status data for an AP with a specific IPv6 address by entering an IPv6 address in dotted-decimal format.

Usage Guidelines

Use this command to view the USBUniversal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. information provisioned on the RAP.

Examples

The output of the command shows the USBUniversal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. information provisioned on the RAP.

(host) #show ap debug usb ap-name RAP2

USB Information

---------------

Parameter Value

--------- -----

Manufacturer Pantech,

Product PANTECH

Serial Number

Driver ptuml_cdc_ether

Vendor ID 106c

Product ID 3718

USB Modem State Active

USB Uplink RSSI(in dBm) -73

Supported Network Services CDMA GSM LTE

Firmware Version L0290VWB522F.242

ESN Number 990000472325325

Current Network Service 4G-LTE

Command History

Command

Description

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/