You are here: Home > CLI Commands > Just_CLI_Topics > show ap details

show ap details

show ap details [advanced] {ap-name <ap-name>|ip-addr <ip-addr>|ip6-addr <ip6-addr>|wired-mac <wired-mac>}

Description

This command shows the detailed provisioning parameters, hardware, and operating information for a specific AP.

Syntax

Parameter

Description

advanced

Shows additional information of specified AP. Include the following additional data in the output of this command:

Switch message counts

AP group information

Virtual AP operating information

ap-name <ap-name>

Show data for a specific AP by entering the name of the AP for which you want to display information.

ip-addr <ip-addr>

Show data for an AP with the specified IP address.

ip6-addr <ip6-addr>

Show data for an AP with the specified IPv6 address.

wired-mac <wired-mac>

Show mac address of an AP.

Usage Guidelines

This command shows the detailed provisioning parameters, hardware, and operating information for a specific AP. For the remaining parameters, see the command syntax.

Examples

The following example shows part of the output for the command show ap details advanced ap-name <ap-name>.

(host)[node] #show ap details advanced ap-name ap-205

AP "ap-205" Basic Information

-----------------------------

Item Value

---- -----

AP IP Address 191.191.191.252

LMS IP Address 192.192.189.1

Group default

Location Name N/A

Status Up

Up time 19d:13h:30m:19s

 

AP "ap-205" Hardware Information

--------------------------------

Item Value

---- -----

AP Type 205

Serial # CM0487514

Wired MAC Address 40:e3:d6:cf:61:96

Radio 0 BSSID 40:e3:d6:76:19:70

Radio 1 BSSID 40:e3:d6:76:19:60

Enet 1 MAC Address N/A

Enet 2 MAC Address N/A

Enet 3 MAC Address N/A

Enet 4 MAC Address N/A

Enet 5 MAC Address N/A

Enet 6 MAC Address N/A

Enet 7 MAC Address N/A

 

AP "94:b4:0f:c0:d0:86" Radio[0] Eirp(max, min, offset) Information

-------------------------------------------------------------------

Item Value Source

Eirp max 33 Netinsight

Eirp min 2 Netinsight

Eirp offset 3 Netinsight

 

AP "94:b4:0f:c0:d0:86" Radio[1] Eirp(max, min, offset) Information

-------------------------------------------------------------------

Item Value Source

Eirp max 19 Netinsight

Eirp min 9 Netinsight

Eirp offset -6 Netinsight

The following example shows part of the output for the command show ap details ap-name <ap-name>.

(host) [mynode] #show ap details ap-name ap-205

 

AP "ap-205" Basic Information

-----------------------------

Item Value

---- -----

AP IP Address 191.191.191.252

LMS IP Address 192.192.189.1

Group default

Location Name N/A

Status Up

Up time 19d:13h:30m:19s

 

AP "ap-205" Hardware Information

--------------------------------

Item Value

---- -----

AP Type 205

Serial # CM0487514

Wired MAC Address 40:e3:d6:cf:61:96

Radio 0 BSSID 40:e3:d6:76:19:70

Radio 1 BSSID 40:e3:d6:76:19:60

Enet 1 MAC Address N/A

Enet 2 MAC Address N/A

Enet 3 MAC Address N/A

Enet 4 MAC Address N/A

Enet 5 MAC Address N/A

Enet 6 MAC Address N/A

Enet 7 MAC Address N/A

Starting from ArubaOS 8.3.0.0, this command displays the new statistics on AP recovery mode:

(host)[node] #show ap details ap-name <ap-name>

AP "<ap-name>" Radio 0 Operating Information

------------------------------------------

Item Value Source

---- ----- ------

Very High throughput Enabled Configuration

High throughput Enabled Configuration

Mode AP Configuration

Band 802.11a

Primary Channel 36 Configuration

80MHz Channel Group 36-48 Configuration

EIRP 10.0 Configuration

Fast recovery start 2017-03-09 11:57:56

Fast recovery end 2017-03-09 11:58:00

Fast recovery 1

The output of this command includes the following information:

Column

Description

AP IP Address

IP address of the AP

LMS IP Address

The IP address of the local management switch (LMSLocal Management Switch. In multi-controller networks, each controller acts as an LMS and terminates user traffic from the APs, processes, and forwards the traffic to the wired network. )—the Aruba controller which is responsible for terminating user traffic from the APs, and processing and forwarding the traffic to the wired network.

Group

Name of the AP’s AP group.

Location Name

Location of the AP.

Status

Current status of the AP, either Up or Down.

Up time

Number of hours, minutes and seconds since the last controller reboot or bootstrap, in the format hours:minutes:seconds.

AP Type

AP model

Serial #

Serial number for the AP

Wired MAC address

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of the wired interface.

Radio 0 BSSID

Basic Service Set Identifier (BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly.) of the AP’s radio 0. This is usually the radio’s MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address.

Radio 1 BSSID

Basic Service Set Identifier (BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly.) of the AP’s radio 1. This is usually the radio’s MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address.

Enet 1 MAC address

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of the Ethernet1 port of AP.

Enet 3 MAC address

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of the Ethernet3 port of AP.

Enet 4 MAC address

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of the Ethernet4 port of AP.

Enet 5 MAC address

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of the Ethernet5 port of AP.

Enet 6 MAC address

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of the Ethernet6 port of AP.

Enet 7 MAC address

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of the Ethernet7 port of AP.

Fast recovery start

Start date and time of the AP Fast Recovery process.

Fast recovery end

End date and time of the AP Fast Recovery process.

Fast Recovery

Number of Fast Recoveries that happened in the AP.

The following example shows the output of the show ap details advanced ip-addr <ip-addr> command, where a controller ages out an AP:

(host)[node] #show ap details advanced ip-addr 10.3.90.17

AP "9c:1c:12:c0:86:5a" Basic Information ----------------------------------------

Item Value ---- ----- AP IP Address 10.65.39.245 LMS IP Address 10.65.38.93 Group test-rap Location Name N/A Status Up Up time 4d:8h:39m:23s AP Flags: ; Licensed; Ready for Standby; Standby Not Connected Installation indoor max delay between msgs, cfgs: 4710, 4710 ap RTT total, hiwmk: 29, 10 Currently in reglist No Reglist Entries, Exits: 1702 1702 time in reglist total, hiwmk: 14 1 calls to bulk_reg, reg_single: 1702 5062 inter registration gap total, hiwmk: 376439 4710 VAP registration errs, retries: 0 0 VAP Registration Requests, Responses, Re-Requests: 3360 3360 0 registration batch size 6 SACC registration Requests, Responses 0 0 SACC registration errs, retries: 0 0 ACL msgsz adaptations 0 Max Nodes unlimited LMS macid 00:0b:86:9a:04:17 AP "9c:1c:12:c0:86:5a" Licensing Information ---------------------------------- Item Value ---- ----- AP License Total Increments 179 AP License Total Decrements 178 AP License Total Active Increments 179 AP License Total Active Decrements 178 AP License Total Standby Increments 0 AP License Total Standby Decrements 0 AP Total GSM Standby Update Counter 0 Current AP License Total Increments 1 Current AP License Total Decrements 0 Current AP License Active Increments 1 Current AP License Active Decrements 0 Current AP License Standby Increments 0 Current AP License Standby Decrements 0 Current AP GSM Standby Update Counter 0 Current AP GSM Info 44/4/0/0 Rebootstraps and Control Messages Log ------------------------------------- Recent Messages Time now: Tue Jun 26 04:38:31 2018 --------------- ---------------------------------- Time Offset Message details ----------- --------------- -195 RCVD: STATUS_REPORT len=57 peer=10.65.39.245 seq_num=2949 rtt=0 result=OK -200 SENT: CONFIG len=351 peer=10.65.39.245 seq_num=1867 tries=1 rtt=0 result=OK -200 RCVD: CHAN_PWR_CHANGE len=30 peer=10.65.39.245 seq_num=2948 rtt=0 result=OK Rebootstrap Thu Jun 21 20:01:11 2018 Time Offset Message details ----------- --------------- -0 RCVD: HELLO len=1410 peer=10.65.39.245 seq_num=0 rtt=0 result=OK -337 SENT: ACL_CONFIG len=333 peer=10.65.39.245 seq_num=108 tries=1 rtt=-1 -347 SENT: ACL_CONFIG len=333 peer=10.65.39.245 seq_num=108 tries=1 rtt=-1 Rebootstrap Thu Jun 21 19:55:03 2018 Time Offset Message details ----------- --------------- -0 RCVD: HELLO len=1435 peer=10.65.39.245 seq_num=0 rtt=0 result=OK -49 SENT: ACL_CONFIG len=335 peer=10.65.39.245 seq_num=101 tries=1 rtt=-1 -59 SENT: ACL_CONFIG len=335 peer=10.65.39.245 seq_num=101 tries=1 rtt=-1 Rebootstrap Thu Jun 21 19:53:44 2018 Time Offset Message details ----------- --------------- -0 RCVD: HELLO len=1435 peer=10.65.39.245 seq_num=0 rtt=0 result=OK -48 SENT: FW_CONFIG len=664 peer=10.65.39.245 seq_num=15 tries=3 rtt=-1 -70 SENT: CLEAR_FW_CONFIG len=101 peer=10.65.39.245 seq_num=14 tries=1 rtt=0 result=OK Info of last session Last heartbeat seq number 28 Reason for disconnect Deleted by SAPM(KEEPALIVE timeout) Timestamp 2018-06-21 19:55:43

Related Commands

Command

Description

ap system-profile

This command configures an AP system profile.

Command History

Command

Description

ArubaOS 8.4.0.0

The Reason for disconnect field was added to the output of the show ap details advanced ip-addr <ip-addr> command.

The output of the show ap details advanced ap-name <ap-name> command was modified to display Eirp (max, min, offset) information.

ArubaOS 8.3.0.0

Additional statistics on AP Fast Recovery was introduced.

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master and Enable mode on Managed Device.

/*]]>*/