You are here: Home > CLI Commands > Just_CLI_Topics > show ap enet-link-profile

show ap enet-link-profile

show ap enet-link-profile [<profile>]

Description

Show a list of all EthernetEthernet is a network protocol for data transmission over LAN. Link profiles.

Usage Guidelines

Include a profile name to display details for the specified EthernetEthernet is a network protocol for data transmission over LAN. Link Profile, or omit the <profile> parameter to display a list of all EthernetEthernet is a network protocol for data transmission over LAN. Link profiles.

Example

This command shows the speed of the EthernetEthernet is a network protocol for data transmission over LAN. interface and the current duplex mode for the EthernetEthernet is a network protocol for data transmission over LAN. Link profile “default”:

(host) [mynode] #show ap enet-link-profile default

 

AP Ethernet Link profile "default"

----------------------------------

Parameter Value

--------- -----

Speed auto Duplex auto 802.3az (EEE) Disabled 802.3bz Yes Power over Ethernet Disabled

The output of this command includes the following parameters:

Parameter

Description

Speed

The speed of the EthernetEthernet is a network protocol for data transmission over LAN. interface. This value can be either 10 Mbps, 100

Mbps, 1000Mbps (1 GbpsGigabits per second.), or auto (auto-negotiated).

Duplex

The duplex mode of the AP’s EthernetEthernet is a network protocol for data transmission over LAN. interface. This value can be either full,

half, or auto (auto-negotiated).

802.3az

This displays if the support for the 802.3az Energy Efficient EthernetEthernet is a network protocol for data transmission over LAN. (EEE) standard is enabled.

802.3bz

This displays if the support for IEEEInstitute of Electrical and Electronics Engineers. 802.3bz standard is enabled.

Power Over EthernetEthernet is a network protocol for data transmission over LAN.

This displays if the physical port is Power over EthernetEthernet is a network protocol for data transmission over LAN. (PoEPower over Ethernet. PoE is a technology for wired Ethernet LANs to carry electric power required for the device in the data cables. The IEEE 802.3af PoE standard provides up to 15.4 W of power on each port.) enabled.

Related Commands

Command

Description

ap enet-link-profile

This command configures an AP EthernetEthernet is a network protocol for data transmission over LAN. link profile.

Command History

Version

Modification

ArubaOS 8.3.0.0

A new row 802.3bz displays if the standard is enabled or disabled for an AP.

ArubaOS 8.0.0.0

Command introduced

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable mode on Mobility Master.

/*]]>*/