You are here: Home > CLI Commands > Just_CLI_Topics > show ap greenap

show ap greenap

show ap greenap

amon pending-ap {all | ip-addr <ip-addr> | ip6-addr <ip6-addr>}

counters{ap-name <ap-name> | ip-addr <ip-addr> | ip6-addr <ip6-addr> | wired-mac <wired-mac>}

request pending-ap {all | ip-addr <ip-addr> | ip6-addr <ip6-addr>}

Description

This command displays all the pending APs in the per-md list, sends the AP_INFO AMONAdvanced Monitoring. AMON is used in Aruba WLAN deployments for improved network management, monitoring and diagnostic capabilities. message for a particular AP, and track Green AP related counters.

Syntax

Parameter

Description

amon

AMONAdvanced Monitoring. AMON is used in Aruba WLAN deployments for improved network management, monitoring and diagnostic capabilities. message.

pending-ap

Displays the pending AP list.

all

Displays the pending AP list for the managed device.

ip-addr

Displays the pending AP list for a particular IP address of the managed device.

ip6-addr

Displays the pending AP list for a particular IPv6 address of the managed device.

counters

Displays all the counters for Green AP.

ap-name

Displays the counters for a particular AP name.

ip-addr

Displays the counters for a particular IP address of the managed device.

ip6-addr

Displays the counters for a particular IPv6 address of the managed device.

request

Displays the power-save or wakeup requests for a Green AP.

Usage Guidelines

AMON

When AP is in deep-sleep mode, the managed device sends the AP_INFO AMONAdvanced Monitoring. AMON is used in Aruba WLAN deployments for improved network management, monitoring and diagnostic capabilities. message for a particular AP.

 

The amon command can only be run in the managed device.

Counters

This command is used to track green AP related counters, for example, how many deep-sleep or wake-up requests are received from Netinsight and how many requests are dropped, and so on.

Request

This command is used to display all the pending APs in the per-md list.

Example

The following command helps in debugging and tracking all the requests using counters:

show ap greenap counters ap-name <ap-name>

Counters for greenap

--------------------

Item Value

---- -----

Received deep-sleep requests 76

Received wake-up requests 14

Received agent-wake-up requests 3

Listed deep-sleep requests 20

Listed wake-up requests 1

Listed agent-wake-up requests 3

Forwarded deep-sleep requests 20

Forwarded wake-up requests 1

Forwarded agent-wake-up requests 3

Acks sent for deep-sleep 0

Acks sent for wake-up 0

Acks sent for agent-wake-up 0

Acked deep-sleep requests 20

Acked wake-up requests 1

Acked agent-wake-up requests 3

ACCEPT 0

PRELOAD 0

UPGRADE 0

PROVISION 0

...

...

...

Related Commands

Command

Description

ap system-profile

This command configures an AP system profile.

Command History

Release

Modification

ArubaOS 8.4.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable mode on Mobility Master and managed device.

/*]]>*/