You are here: Home > CLI Commands > Just_CLI_Topics > show ap image-preload status

show ap image-preload status

show ap image-preload status

all

list

summary

Description

Display the list of APs that will preload a new version of software from a controller with the AP preload feature activated.

Syntax

Parameter

Description

all

Display the complete status of AP image preload operation.

list

Displays the list of APs and their image preload statuses.

summary

Summarizes the status of AP image preload operation.

Usage Guidelines

Issue this command to display a list of APs in the AP image preload list, and monitor the download status of each AP.

Example

The example below shows the current status of APs downloading a new image using the AP image preload feature.

(host) #show ap image-preload status all

 

AP Image Preload Parameters

---------------------------

Item Value

---- -----

Status Active

Mode All APs

Partition 0

Build 40740

Max Simultaneous Downloads 512

Start Time 2013-11-05 15:38:50

 

AP Image Preload AP Status Summary

----------------------------------

AP Image Preload State Count

---------------------- -----

Preloaded 1

TOTAL 1

 

AP Image Preload AP Status

--------------------------

AP Name AP Group AP IP AP Type Preload State Start Time End Time Failure Count Failure Reason

------- -------- ----- ------- ------------- ---------- -------- ------------- --------------

6c:f3:7f:c3:a6:56 SecureJack 10.3.90.14 135 Preloaded 2013-11-05 15:38:50 2013-11-05 15:39:58 0

 

(host) #show ap image-preload status list

 

AP Image Preload AP Status

--------------------------

AP Name AP Group AP IP AP Type Preload State Start Time End Time Failure Count Failure Reason

------- -------- ----- ------- ------------- ---------- -------- ------------- --------------

6c:f3:7f:c3:a6:56 SecureJack 10.3.90.14 135 Preloaded 2013-11-05 15:38:50 2013-11-05 15:39:58 0

 

(host) #show ap image-preload status summary

 

AP Image Preload Parameters

---------------------------

Item Value

---- -----

Status Active

Mode All APs

Partition 0

Build 40740

Max Simultaneous Downloads 512

Start Time 2013-11-05 15:38:50

AP Image Preload AP Status Summary

----------------------------------

AP Image Preload State Count

---------------------- -----

Preloaded 1

TOTAL 1

 

The output of this command includes the following information:

Column

Description

AP Image Preload Parameters

Shows if this feature has been enabled (has an active status) or is disabled (has an inactive status).

AP Image Preload AP Status Summary

These two columns list the different possible preload states for APs eligible to preload a new software image, and the total number of APs in each state.

Preloaded: Number of APs that have finished preloaded a new software image.

Preloading: Number of APs that are currently downloading the new image.

Waiting: Number of APs that are waiting to start preloading the new image from the controller.

AP Image Preload AP Status

This section displays the following details for each preload attempt.

AP Name

Name of an AP eligible to preload a new software image.

AP Group

AP group of an AP eligible to preload a new software image.

AP IP

IP address of the AP.

AP Type

AP model type.

Preload State

Current state of the AP’s preload attempt

Preloaded: The AP is finished preloading a new software image.

Preloading: The AP is currently downloading the new image.

Waiting: The AP is waiting to start preloading the new image from the controller.

Start Time

Time the AP starting preloading an image.

End Time

Time the AP completed the image preload.

Failure Count

Number of times that the AP failed to preload the new image.

Failure Reason

In the event of an image preload failure, this column will display the reason that the image download failed.

Related Commands

Command

Description

show ap image version

Display an AP’s image version information.

Command History

Release

Modification

ArubaOS 8.0.0.0 Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master or managed devices.

/*]]>*/