You are here: Home > CLI Commands > Just_CLI_Topics > show ap ip health-check

show ap ip health-check

show ap ip health-check {ap-name <ap-name> | ip-addr <ip-addr> | ip6-addr <ip6-addr>}

Description

This command shows health of an access point.

Syntax

Parameter

Description

Range

Default

ap-name <ap-name>

Shows health of an access point specified by AP name.

ip-addr <ip-addr>

Shows health of an access point specified by IP address.

ip6-addr <ip6-addr>

Shows health of an access point specified by IPv6 address.

Usage Guidelines

This command shows health of an access point. For the remaining parameters, see the command syntax.

Example

Access the CLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. and use the following command to show health of an access point with IP address 192.0.2.1:

(host) [mynode] #show ap ip health-check ip-addr 192.0.2.1

 

AP Health-Check Status

----------------------

Interval Probe IP Avg RTT(in ms) Total_TX_Probes Total_RX_Probes Total_Packet Loss

-------- -------- -------------- --------------- --------------- -----------------

Related Commands

Command

Description

show ip health-check

This command displays the health-check status of the uplink interfaces of a branch office managed device.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable mode on Mobility Master.

/*]]>*/