You are here: Home > CLI Commands > Just_CLI_Topics > show ap-lacp-striping-ip

show ap-lacp-striping-ip

show ap-lacp-striping-ip

Description

Profile to enable/disable AP LACPLink Aggregation Control Protocol. LACP is used for the collective handling of multiple physical ports that can be seen as a single channel for network traffic purposes. feature and to specify GREGeneric Routing Encapsulation. GRE is an IP encapsulation protocol that is used to transport packets over a network. striping IP to LMSLocal Management Switch. In multi-controller networks, each controller acts as an LMS and terminates user traffic from the APs, processes, and forwards the traffic to the wired network. IP mapping.

Syntax

No parameters

Usage Guidelines

Example

(host) [mynode] #show ap-lacp-striping-ip

AP LACP LMS map information

---------------------------

Parameter Value

--------- -----

AP LACP Striping IP Enabled

GRE Striping IP 2.2.2.2 LMS 3.3.3.3

GRE Striping IP 4.4.4.4 LMS 5.5.5.5

GRE Striping IP 10.65.30.50 LMS 10.65.30.60

Related Commands

Command

Description

ap-lacp-striping-ip

This command defines an AP LACPLink Aggregation Control Protocol. LACP is used for the collective handling of multiple physical ports that can be seen as a single channel for network traffic purposes. LMSLocal Management Switch. In multi-controller networks, each controller acts as an LMS and terminates user traffic from the APs, processes, and forwards the traffic to the wired network. map information profile that maps a GREGeneric Routing Encapsulation. GRE is an IP encapsulation protocol that is used to transport packets over a network. striping IP address to an existing LMSLocal Management Switch. In multi-controller networks, each controller acts as an LMS and terminates user traffic from the APs, processes, and forwards the traffic to the wired network. -IP address.

Command History

Version

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable mode on Mobility Master.

/*]]>*/