You are here: Home > CLI Commands > Just_CLI_Topics > show ap lldp counters

show ap lldp counters

show ap lldp counters

ap-name <ap-name>

ip-addr <ip-addr>

ip6-addr (ipv6-addr>

Description

Show LLDPLink Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol in the Internet Protocol suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, which is principally a wired Ethernet. counters for a specific AP, or all APs sending or receiving LLDPLink Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol in the Internet Protocol suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, which is principally a wired Ethernet. Protocol Data Units (PDUs).

Syntax

Parameter

Description

ap-name <ap-name>

Show counter statistics for an AP with a specific name.

ip-addr <ip-addr>

View counter statistics for an AP with a specific IP address. Enter the IP address of the AP in dotted-decimal format.

ip6-addr <ip-addr>

View counter statistics for an AP with a specific IPv6 address.

Examples

The output of the command below shows LLDPLink Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol in the Internet Protocol suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, which is principally a wired Ethernet. counter information for two interfaces.

(host) [mynode] #show ap lldp counters

AP LLDP Counters (Updated every 60 seconds)

-------------------------------------------

AP Interface Received Unknown TLVs Malformed Overflow Transmitted

-- --------- -------- ------------ --------- -------- -----------

00:1a:1e:ce:fb:bf bond0 0 0 0 0 68159

00:24:6c:c0:00:86 bond0 0 0 0 0 68153

The output of this command includes the following information:

Parameter

Description

AP

Name of the AP sending or receiving LLDPLink Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol in the Internet Protocol suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, which is principally a wired Ethernet. PDUs.

Interface

Name of the AP interface sending or re ce vi ng LLDPLink Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol in the Internet Protocol suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, which is principally a wired Ethernet. PDUs.

Received

Number of packets received on the specified interface.

Unknown TLVs

Number of LLDPLink Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol in the Internet Protocol suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, which is principally a wired Ethernet. Protocol Data Units (PDUs) with an unknown type-length-value (TLVType-length-value or Tag-Length-Value. TLV is an encoding format. It refers to the type of data being processed, the length of the value, and the value for the type of data being processed.).

Number of Malformed packets

Number of malformed packets received on that interface

Overflow

Number of times that an LLDPLink Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol in the Internet Protocol suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, which is principally a wired Ethernet. neighbor could not be added to the neighbor table (there is a limit of 8 per port)

Transmitted

Number of packets transmitted from that interface

Related Commands

Command

Description

ap lldp profile

This defines an LLDPLink Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol in the Internet Protocol suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, which is principally a wired Ethernet. profile that specifies the TLVType-length-value or Tag-Length-Value. TLV is an encoding format. It refers to the type of data being processed, the length of the value, and the value for the type of data being processed. elements to be sent in LLDPLink Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol in the Internet Protocol suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, which is principally a wired Ethernet. PDUs.

Command History

Version

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable mode on Mobility Master.

/*]]>*/