You are here: Home > CLI Commands > Just_CLI_Topics > show ap lldp med-network-policy-profile

show ap lldp med-network-policy-profile

show ap lldp med-network-policy-profile [<profile>]

Description

Display a list of LLDP-MEDLLDP–Media Endpoint Discovery. LLDP-MED facilitates information sharing between endpoints and network infrastructure devices. Network Policy profiles, or display the current configuration settings of an individual profile.

Syntax

Parameter

Description

<profile>

Specify a LLDP-MEDLLDP–Media Endpoint Discovery. LLDP-MED facilitates information sharing between endpoints and network infrastructure devices. Network Policy profile name to view configuration settings for that profile.

Usage Guidelines

The LLDP-MEDLLDP–Media Endpoint Discovery. LLDP-MED facilitates information sharing between endpoints and network infrastructure devices. Network policy profile allows you to configure an extension to LLDPLink Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol in the Internet Protocol suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, which is principally a wired Ethernet. that supports interoperability between VoIPVoice over IP. VoIP allows transmission of voice and multimedia content over an IP network. devices and other networking clients. LLDP-MEDLLDP–Media Endpoint Discovery. LLDP-MED facilitates information sharing between endpoints and network infrastructure devices. network policy discovery lets end-points and network devices advertise their VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. IDs (e.g. voice VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN.), priority levels, and DSCPDifferentiated Services Code Point. DSCP is a 6-bit packet header value used for traffic classification and priority assignment. values.allows you to define a set of provisioning parameters to an AP group.

Issue this command without the <profile-name> option to display the entire LLDP-MED Network policy profile list, including profile status and the number of references to each profile. Include a profile name to display the configuration settings for that profile.

Examples

The following example lists all LLDP-MED Network policy profile profiles. The References column lists the number of other profiles with references to that LLDP-MED Network policy profile, and the ProfileStatus column indicates whether the profile is predefined.

The output of the command below shows that the controller has three LLDP-MED network profiles.

(host) [mynode] #show ap lldp med-network-policy-profile

AP LLDP-MED Network Policy Profile List

---------------------------------------

Name References Profile Status

---- ---------- --------------

default 0

video    2

voice    1

Total:2

The following command displays configuration details for the LLDP-MED Network Policy profile named video.

(host) #show ap lldp med-network-policy-profile video

AP LLDP-MED Network Policy Profile "default"

--------------------------------------------

Parameter Value

--------- -----

LLDP-MED application type streaming-video

LLDP-MED application VLAN 16

LLDP-MED application VLAN tagging Tagged

LLDP-MED application Layer-2 priority 0

LLDP-MED application Differentiated Services Code Point 0

The output of this command includes the following information:

Parameter

Description

LLDP-MED application type

Type of application that this profile manages. This profile supports the following options:

guest-voice : The AP services a separate voice network for guest users and visitors.

guest-voice-signaling : The AP is part of a network that requires a different policy for guest voice signaling than for guest voice media. Do not use this application type if both the same network policies apply to both guest voice and guest voice signaling traffic.

softphone-voice : The AP supports voice services using softphone software applications on devices such as PCs or laptops.

streaming-video : T The AP supports broadcast or multicast video or other streaming video services that require specific network policy treatment. This application type is not recommended for video applications that rely on TCP with buffering.

video-conferencing : T The AP supports video conferencing equipment that provides real-time, interactive video/audio services.

video-signaling : T The AP is part of a network that requires a different policy for video signaling than for the video media. Do not use this application type if both the same network policies apply to both video and video signaling traffic.

voice : T he AP services IP telephones and other appliances that support interactive voice services. This is the default application type.

voice-signaling : T The AP is part of a network that requires a different policy for voice signaling than for the voice media. Do not use this application type if both the same network policies apply to both voice and voice signaling traffic.

LLDP-MED application VLAN

Indicates the VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. ID (0-4094) or VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. name of the VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. used by the application.

LLDP-MED application VLAN tagging

Indicates if the policy applies to a to a VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. that is tagged with a VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. ID or untagged. The default value is untagged.

NOTE: When an LLDP-MEDLLDP–Media Endpoint Discovery. LLDP-MED facilitates information sharing between endpoints and network infrastructure devices. network policy is defined for use with an untagged VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN., then the L2 priority field is ignored and only the DSCPDifferentiated Services Code Point. DSCP is a 6-bit packet header value used for traffic classification and priority assignment. value is used.

LLDP-MED application Layer-2 priority

Displays a configured 802.1p priority level for the specified application type, where 0 is the lowest priority level and 7 is the highest priority.

LLDP-MED application Differentiated Services Code Point

Displays a configured Differentiated Services Code Point (DSCPDifferentiated Services Code Point. DSCP is a 6-bit packet header value used for traffic classification and priority assignment. ) priority value for the specified application type, where 0 is the lowest priority level and 63 is the highest priority.

Related Commands

Command

Description

ap lldp med-network-policy-profile

This command defines an LLDPLink Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol in the Internet Protocol suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, which is principally a wired Ethernet. MED network policy profile that defines DSCPDifferentiated Services Code Point. DSCP is a 6-bit packet header value used for traffic classification and priority assignment. values and L2 priority levels for a voice or video application.

Command History

Version

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable mode on Mobility Master.

/*]]>*/