You are here: Home > CLI Commands > Just_CLI_Topics > show ap monitor association

show ap monitor association

show ap monitor association {ap-name <ap-name>}|{bssid <bssid>}|{ip-addr <ip-addr>} <ap-bssid>

Description

Show the association table for an Air Monitor (AMAir Monitor. AM is a mode of operation supported on wireless APs. When an AP operates in the Air Monitor mode, it enhances the wireless networks by collecting statistics, monitoring traffic, detecting intrusions, enforcing security policies, balancing wireless traffic load, self-healing coverage gaps, and more. However, clients cannot connect to APs operating in the AM mode.).

Syntax

Parameter

Description

ap-name <ap-name>

Show data for an AMAir Monitor. AM is a mode of operation supported on wireless APs. When an AP operates in the Air Monitor mode, it enhances the wireless networks by collecting statistics, monitoring traffic, detecting intrusions, enforcing security policies, balancing wireless traffic load, self-healing coverage gaps, and more. However, clients cannot connect to APs operating in the AM mode. with a specific name.

bssid <bssid>

Show data for an AMAir Monitor. AM is a mode of operation supported on wireless APs. When an AP operates in the Air Monitor mode, it enhances the wireless networks by collecting statistics, monitoring traffic, detecting intrusions, enforcing security policies, balancing wireless traffic load, self-healing coverage gaps, and more. However, clients cannot connect to APs operating in the AM mode. with a specific Basic Service Set Identifier (BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly.). The Basic Service Set Identifier (BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly.) is usually the AMAir Monitor. AM is a mode of operation supported on wireless APs. When an AP operates in the Air Monitor mode, it enhances the wireless networks by collecting statistics, monitoring traffic, detecting intrusions, enforcing security policies, balancing wireless traffic load, self-healing coverage gaps, and more. However, clients cannot connect to APs operating in the AM mode.’s MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address.

ip-addr <ip-addr>

Show data for an AMAir Monitor. AM is a mode of operation supported on wireless APs. When an AP operates in the Air Monitor mode, it enhances the wireless networks by collecting statistics, monitoring traffic, detecting intrusions, enforcing security policies, balancing wireless traffic load, self-healing coverage gaps, and more. However, clients cannot connect to APs operating in the AM mode. with a specific IP address by entering its IP address in dotted-decimal format.

<ap-bssid>

BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly. of an AP.

Examples

The output of the command lists the MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. addresses associated with the Air Monitor BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly..

(host) #show ap monitor association ap-name ap9 00:1a:1e:11:74:a1

Association Table

-----------------

mac rsta-type auth phy-type

--- --------- ---- --------

00:1d:d9:01:c4:50 valid yes 80211a

00:17:f2:4d:01:e2 valid yes 80211a

00:1f:3b:8c:28:89 valid yes 80211a

00:1d:d9:05:05:d0 valid yes 80211a

00:14:a4:25:72:6d valid yes 80211a

00:19:7d:d6:74:8d valid yes 80211a

 

The output of this command includes the following information:

Column

Description

mac

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address associated with the Air Monitor BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly.

rsta-type

Rogue station type:

interfering: Interfering station.

valid: Station is not a rogue station.

DoS: Station may have attempted a DoSDenial of Service. DoS is any type of attack where the attackers send excessive messages to flood traffic and thereby preventing the legitimate users from accessing the service. attack.

auth

Displays a yes if the client has been authenticated.

phy-type

The RFRadio Frequency. RF refers to the electromagnetic wave frequencies within a range of 3 kHz to 300 GHz, including the frequencies used for communications or Radar signals. bandBand refers to a specified range of frequencies of electromagnetic radiation. in which the AP should operate:

802.11g = 2.4 GHzGigahertz.

802.11a = 5 GHzGigahertz.

Related Commands

Command

Description

am

The scan sub-command enables channel scanning for the specified air monitor. In addition, the test sub-command enables the client to test an air monitor..

Command History

Command

Description

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/