You are here: Home > CLI Commands > Just_CLI_Topics > show ap mesh-cluster-profile

show ap mesh-cluster-profile

show ap mesh-cluster-profile [<profile>]

Description

Show configuration settings for a mesh cluster profile.

Syntax

Parameter

Description

<profile>

Name of a mesh cluster profile

Usage Guidelines

The command show ap mesh-cluster-profile displays a list of all mesh cluster profiles configured on the Mobility Master, including the number of references to each profile and each profile’s status. Include the optional <profile> parameter to show detailed settings for an individual mesh cluster profile.

Examples

The example below shows the configuration settings for the mesh cluster profile “meshcluster2”.

(host)[mynode] #show ap mesh-cluster-profile meshcluster2

 

Mesh Cluster profile "meshcluster2"

------------------------------

Parameter Value

--------- -----

Cluster Name company-mesh

RF Band a

Encryption opensystem

WPA Hexkey N/A

WPA Passphrase N/A

The output of this command includes the following information:

Parameter

Description

Cluster Name

Name of the mesh cluster using this profile

RF band

The RFRadio Frequency. RF refers to the electromagnetic wave frequencies within a range of 3 kHz to 300 GHz, including the frequencies used for communications or Radar signals. bandBand refers to a specified range of frequencies of electromagnetic radiation. in which the AP should operate:

g = 2.4 GHzGigahertz.

a = 5 GHzGigahertz.

Encryption

Data encryption setting for the mesh cluster profile.

opensystem—No authentication and encryption.

wpa2-psk-aesWPA2Wi-Fi Protected Access 2. WPA2 is a certification program maintained by IEEE that oversees standards for security over wireless networks. WPA2 supports IEEE 802.1X/EAP authentication or PSK technology, but includes advanced encryption mechanism using CCMP that is referred to as AES. with AESAdvanced Encryption Standard. AES is an encryption standard used for encrypting and protecting electronic data. The AES encrypts and decrypts data in blocks of 128 bits (16 bytes), and can use keys of 128 bits, 192 bits, and 256 bits. encryption using a preshared key.

WPA Hexkey

The WPAWi-Fi Protected Access. WPA is an interoperable wireless security specification subset of the IEEE 802.11 standard. This standard provides authentication capabilities and uses TKIP for data encryption. PSKPre-shared key. A unique shared secret that was previously shared between two parties by using a secure channel. This is used with WPA security, which requires the owner of a network to provide a passphrase to users for network access. (only for mesh cluster profiles using WPA2Wi-Fi Protected Access 2. WPA2 is a certification program maintained by IEEE that oversees standards for security over wireless networks. WPA2 supports IEEE 802.1X/EAP authentication or PSK technology, but includes advanced encryption mechanism using CCMP that is referred to as AES. with AESAdvanced Encryption Standard. AES is an encryption standard used for encrypting and protecting electronic data. The AES encrypts and decrypts data in blocks of 128 bits (16 bytes), and can use keys of 128 bits, 192 bits, and 256 bits. encryption).

WPA Passphrase

The WPAWi-Fi Protected Access. WPA is an interoperable wireless security specification subset of the IEEE 802.11 standard. This standard provides authentication capabilities and uses TKIP for data encryption. password that generates the preshared key (only for mesh cluster profiles using WPA2Wi-Fi Protected Access 2. WPA2 is a certification program maintained by IEEE that oversees standards for security over wireless networks. WPA2 supports IEEE 802.1X/EAP authentication or PSK technology, but includes advanced encryption mechanism using CCMP that is referred to as AES. with AESAdvanced Encryption Standard. AES is an encryption standard used for encrypting and protecting electronic data. The AES encrypts and decrypts data in blocks of 128 bits (16 bytes), and can use keys of 128 bits, 192 bits, and 256 bits. encryption).

Related Commands

Command

Description

ap mesh-cluster-profile

This command configures a mesh cluster profile used by mesh nodes.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

This show command is available in the base operating system. Commands to configure the mesh feature require the Mesh license.

Enable or Config mode on managed devices.

/*]]>*/