You are here: Home > CLI Commands > Just_CLI_Topics > show ap mesh debug current-cluster

show ap mesh debug current-cluster

show ap mesh debug current-cluster

ap-name <ap-name>

bssid <bssid>

ip-addr <ip-addr>

Description

This command shows the AP mesh debug information for the mesh cluster currently used by a mesh point or mesh portal.

Syntax

Parameter

Description

ap-name <ap-name>

Shows AP mesh debug information for the specified AP name.

bssid <bssid>

Shows AP mesh debug information for the specified BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly.. A BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly. is usually the MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of an AP.

ip-addr <ip-addr>

Shows AP mesh debug information for the specified IP address.

Examples

The example shows the AP mesh debug information of an AP named mp2.

(host) [mynode] #show ap mesh debug current-cluster ap-name mp2

 

AP "mp2" Current Cluster Profile: default

-----------------------------------------

Item Value

---- -----

Cluster Name smettu-mesh

RF Band a

Encryption opensystem

WPA Hexkey N/A

WPA Passphrase ********

The output of this command includes the following information:

Column

Description

Cluster Name

Name of the mesh cluster using this profile

RF band

The RFRadio Frequency. RF refers to the electromagnetic wave frequencies within a range of 3 kHz to 300 GHz, including the frequencies used for communications or Radar signals. bandBand refers to a specified range of frequencies of electromagnetic radiation. in which the mesh point or mesh portal operates:

g = 2.4 GHzGigahertz.

a = 5 GHzGigahertz.

Encryption

Data encryption setting for the mesh cluster profile.

opensystem—No authentication and encryption.

wpa2-psk-aesWPA2Wi-Fi Protected Access 2. WPA2 is a certification program maintained by IEEE that oversees standards for security over wireless networks. WPA2 supports IEEE 802.1X/EAP authentication or PSK technology, but includes advanced encryption mechanism using CCMP that is referred to as AES. with AESAdvanced Encryption Standard. AES is an encryption standard used for encrypting and protecting electronic data. The AES encrypts and decrypts data in blocks of 128 bits (16 bytes), and can use keys of 128 bits, 192 bits, and 256 bits. encryption using a preshared key.

WPA Hexkey

The WPAWi-Fi Protected Access. WPA is an interoperable wireless security specification subset of the IEEE 802.11 standard. This standard provides authentication capabilities and uses TKIP for data encryption. pre-shared key (only for mesh cluster profiles using WPA2Wi-Fi Protected Access 2. WPA2 is a certification program maintained by IEEE that oversees standards for security over wireless networks. WPA2 supports IEEE 802.1X/EAP authentication or PSK technology, but includes advanced encryption mechanism using CCMP that is referred to as AES. with AESAdvanced Encryption Standard. AES is an encryption standard used for encrypting and protecting electronic data. The AES encrypts and decrypts data in blocks of 128 bits (16 bytes), and can use keys of 128 bits, 192 bits, and 256 bits. encryption).

WPA Passphrase

The WPAWi-Fi Protected Access. WPA is an interoperable wireless security specification subset of the IEEE 802.11 standard. This standard provides authentication capabilities and uses TKIP for data encryption. password that generates the preshared key (only for mesh cluster profiles using WPA2Wi-Fi Protected Access 2. WPA2 is a certification program maintained by IEEE that oversees standards for security over wireless networks. WPA2 supports IEEE 802.1X/EAP authentication or PSK technology, but includes advanced encryption mechanism using CCMP that is referred to as AES. with AESAdvanced Encryption Standard. AES is an encryption standard used for encrypting and protecting electronic data. The AES encrypts and decrypts data in blocks of 128 bits (16 bytes), and can use keys of 128 bits, 192 bits, and 256 bits. encryption).

Related Commands

Command

Description

ap mesh-radio-profile

This command configures a mesh radio profile used by mesh nodes.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Configuration mode on Mobility Master.

/*]]>*/