You are here: Home > CLI Commands > Just_CLI_Topics > show ap mesh debug forwarding-table

show ap mesh debug forwarding-table

show ap mesh forwarding-table [ap-name <ap-name>|bssid <bssid>|ip-addr <ip-addr>]

Description

This command displays the forwarding table for a remote mesh point or remote mesh portal.

Syntax

Parameter

Description

ap-name <ap-name>

Show data for a remote mesh node with a specific name.

bssid <bssid>

Show data for a specific Basic Service Set Identifier (BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly.) on an AP. BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly. is usually the AP’s MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address.

ip-addr <ip-addr>

Show data for a remote mesh node with a specific IP address by entering its IP address in dotted-decimal format.

Usage Guidelines

This is an internal technical support command. Aruba technical support may request that you issue this command to help analyze and troubleshoot problems with your mesh network.

Related Commands

Command

Description

ap mesh-radio-profile

This command configures a mesh radio profile used by mesh nodes.

Command History

Version

Modification

ArubaOS 8.4.0.0

The bssid parameter was introduced.

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable mode on Mobility Master.

/*]]>*/