You are here: Home > CLI Commands > Just_CLI_Topics > show ap multizone-profile

show ap multizone-profile

show ap multizone-profile <profile-name>

Description

This command displays an AP MultiZone profile.

Syntax

No syntax.

Examples

The output of the command displays the MultiZone profile and also provides the number of datazones and number of virtual APs available in the primary zone.

(host) (config) ##show ap multizone-profile MZoneProfile

 

Multizone Enabled

 

Multizone Table

--------------

Zone IP Address IPv6 Address Max Vaps Allowed Max Nodes Allowed Description

---- ---------- ------------ ----------------- ----------------- -----------

0 N/A N/A 2 1 N/A

2 10.15.144.5 2001:1001::201 3 1

 

Number of datazones:1

 

Related Commands

Command

Description

ap multizone-profile

MultiZone feature allows AP to terminate to multiple managed devices that reside in different zones. A zone is a collection of managed devices under a single administration domain. The zone can have a single managed device or a cluster. This command allows you to create an AP MultiZone profile, set the data zone index, and controller-ip.

Command History

Release

Modification

ArubaOS 8.4.0.0

The output of the show ap multizone-profile command was modified to display the IPv6 Address and Description columns.

ArubaOS 8.0.1.0

The num-nodes sub-parameter was introduced.

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable or Config mode on managed devices.

/*]]>*/